Scsi Disk Utility; Select Host Adapter; Exit - NEC EXPRESS 320Lb User Manual

SCSI Disk Utility

When "Scan SCSI Bus" is selected in the "Fast!Util Options Menu" the utility
menu appears that is used to format or verify the connected SCSI devices.
Devices can be processed in SCSI buses and SCSI IDs. Be
careful not to forget the selected bus and ID.
The selection of "Continue With Format" in "Low-Level
Format" causes all data in disks to be lost.
!
Low-Level Format
Physically formats the device selected in "Continue With Format." If you
select "Do Not Format Disk", the prior menu displayed reappears.
!
Verify Disk Media
Verifies the device selected in "Continue With Verify." If you select "Do
Not Verify Media," the prior menu displayed reappears.
!
Select Different Disk
Selects another SCSI device on the same SCSI bus.

Select Host Adapter

When "Select Host Adapter" is selected from the "Fast!Util Options" menu, the
list of the host adapters installed in the main system is displayed. Select the
adapter for which the settings are modified.
Note
Ended/LVD 5800 it is used for built-in hard disk.
The utility menu appears which is used to format or verify the connected SCSI
devices.

Exit

After modifying the settings, press ENTER several times to display the
"Fast!Util Options" menu. If you select "Exit Fast!UTIL"from the menu, the
screen for terminating Fast!UTIL appears.
However, if the settings are different from those before the start, the screen
prompting you to save the settings appears before the display of the termination
screen.
3-20 Configuring Your System
! CAUTION
: Do Not select Adapter QLA1280 Single