Selectable Boot Settings Submenu; Restore Default Settings Submenu; Raw Nvram Data Submenu; Scan Scsi Bus - NEC EXPRESS 320Lb User Manual

Selectable Boot Settings Submenu

Feature Choices or Display Only
Selectable SCSI Enabled
Boot Disabled
SCSI Bus 0
1
SCSI Boot ID 0, 1, 2, 3, 4, 5, 6, 7, 8, 9,
10, 11, 12, 13, 14, 15
0, 1, 2, 3, 4, 5, 6, 7, 8, 9,
SCSI Boot LUN
10, 11, 12, 13, 14, 15

Restore Default Settings Submenu

When "Restore Default Settings" is selected the screen for returning the setting
values to the default values is displayed.
Note:
the SCSI ID for SCSI Bus 1 to the value 6. Also, under the
"Host Adapter Settings Submenu" the >4Gbyte Addressing
must be set to "Enabled".

Raw NVRAM Data Submenu

When "Raw NVRAM Data" is selected the information on NVRAM installed in
the host adapter is displayed in hexadecimal format and can not be edited. This
function is only provided to solve problems.

Scan SCSI Bus

When "Scan SCSI Bus" is selected in the "Fast!Util Options Menu" the list of
devices connected to each SCSI bus is displayed in the order of SCSI IDs. The
information to be displayed includes the vendor (device manufacturer), product
name, and firmware revision.
Description
Specify whether the boot from the
SCSI device can be selected or
not selected.
Select the bus to which the started
SCSI device is connected.
Set the SCSI ID of the started
SCSI device.
Select the number of the LUN to
which the started SCSI device is
bound.
After restoring the default settings you must set
Your Setting
Configuring Your System 3-19