Store a function under a key – function key
You want to retrieve a frequently used function - for example "call forwarding on no reply"
- using a single keystroke rather than having to enter it by hand. Usually the function is
assigned so that you:
• activate the function with the first keystroke – key-LED lit,
• and deactivate the command again with a second keystroke - key-LED off.
If you have connected a MiVoice M530 or MiVoice M535 expansion key module, the
LED indicates the key status:
• Red: Function is activated.
• Green: Function is deactivated.
Storing a function under a key (from a predefined selection of functions):
Menu
Settings
>
Keys
Foxkey
Function key
<Function>
Storing a function under a key (from a predefined selection of functions):
<long>
Function key
<Function>
MiVoice 5380 / MiVoice 5380 IP
eud-1679/1.0 – R3.0 – 08.2015
Storing a function under the Foxkey:
Press the
Foxkey.
Menu
Scroll to
and press the
Settings
Scroll to
>
Keys
Foxkey
Display shows choice of key types.
➔
Scroll to
Function key
The currently set function is displayed with
➔
Select the function you want and press the
The further prompting depends on the function (see Chapter "Supple-
➔
mentary features", page 31). Once you have made all the settings, the
function is stored under the key.
Storing a function under a configurable key/presence key:
Press the key and hold it down for a moment.
Display shows choice of key types.
➔
Scroll to
Function key
➔
The currently set function is displayed with
Select the function you want and press the
The further prompting depends on the function (see Chapter "Supple-
➔
mentary features", page 31). Once you have made all the settings, the
function is stored under the key.
Foxkey.
Select
>
and press the Foxkey you want.
Select
and press the
Select
and press the
Select
Personalizing your phone
Foxkey.
.
Foxkey.
Select
Foxkey.
.
Foxkey.
Select
95