Mitel MiVoice 5380 User Manual page 62

Supplementary features
Tracking a malicious call
Your are being threatened or molested by a call. You want to identify the caller.
Using the (MCID: Malicious Call Identification) function the provider records the following
call data: Your phone number, the caller's phone number, and the date and time of the
call.
MCID has to be enabled by your provider. Your provider will inform you about accessing
the recorded call data.
This function must be stored under a Foxkey or a function key (see Chapter "Configuring
keys", page 93).
MCID
MCID
Activating personal call routing
You wan to specify which of your phone shall ring when you receive a call.
If your system administrator has set up a phone number with several phones for you as
well as the five call routings (One-number user concept, see chapter "Purpose and func-
tion", page 7), you can specify which of your phones shall signal a call by using the per-
sonal call routing. Your system administrator can set up up to 5 call routings. You can only
answer a call on phone where the call is signalled. Contact your system administrator for
more information.
You can activate a call routing for all phones. If you have not configured a call routing, the
default setting (all phones are ringing) is used as standard.
This function can also be stored under a configurable key (see chapter "Configuring
keys", page 93).
Menu
Settings
General
62
During a call:
Press the function key for MCID.
After the call do not hang up: press the function key for
hear the busy tone.
Activating personal call routing:
Press the Foxkey.
Menu
Scroll to and press the
Settings
Scroll to and press the
General
Foxkey.
Select
Foxkey.
Select
MiVoice 5380 / MiVoice 5380 IP
eud-1679/1.0 – R3.0 – 08.2015
while you
MCID