Log in
<Call number, PIN>
Log out
Hotline
The hotline is typically used for lift phones, emergency phones, or for baby alarms or hot-
line in the hospitality/hotel branch.
A user needs help and picks up the handset or presses the loudspeaker key. The user is
automatically routed to the preconfigured hotline destination number stored in the com-
munication server. The person responsible answers the call and is connected with the
user seeking help.
Alarm cancellation delay: Your system administrator can set a delay (0-60 seconds,
depending on the Mitel system phone). During this delay the user can enter another call
number in order not to trigger a call on the hotline destination number. If the user does not
dial another phone number during this predefined time or puts the handset back down
again, a connection with the Hotline number is automatically set up. Contact your system
administrator for more information.
MiVoice 5380 / MiVoice 5380 IP
eud-1679/1.0 – R3.0 – 08.2015
Log in free seating:
Press the
Foxkey.
Log in
Or:
Free seating can also be selected using the menu:
Log
in.
Enter call number and PIN and confirm with the
➔
You are now logged in and can use the free seating phone with your
personal settings.
Note:
The default PIN setting "0000" is not accepted. First change the PIN as
described in chapter "Changing the PIN", page 84 or use the function
code *47 (see User Guide Function Codes on the
you have forgotten your PIN, your system administrator can reset it to the
default setting.
Log out free seating:
Press the
Foxkey.
Log out
The display with the call number is displayed.
➔
Depending on the system configuration enter the PIN and confirm with
the
Foxkey.
Ok
You are now logged off; the free seating phone is now available again
➔
to other users.
Note:
You are automatically logged off if your system administrator has set up
an automatic logoff process.
Supplementary features
>
Menu
Settings
Foxkey.
Ok
Mitel
DocFinder). If
>
65