Mitel MiVoice 5380 User Manual page 99

Function
Free configurable
CLIR
Deflect
Headset
Free config. red/green
Park
Do not disturb
Hands-free
Discreet ring
Voice mail greeting
Ring alone
Personal call routing
Personal call routing
menu
Activate/deactivate ring
tone
MiVoice 5380 / MiVoice 5380 IP
eud-1679/1.0 – R3.0 – 08.2015
Description
You can use function commands to define a function to suit your per-
sonal requirements. A function can consist of one or more function
commands, function codes, and the phone number. You can either
carry out a function directly or store it under a key. For further infor-
mation refer to chapter "Formulating functions", page 102.
This function lets you prevent your call number from being displayed
to the caller. For further information refer to chapter "Suppressing
your call number from your called party's terminal display", page 61.
This function lets you deflect an incoming call to another user. For fur-
ther information refer to chapter "Deflect a call during the ringing
phase", page 38.
This function lets you activate the headset mode. For further informa-
tion refer to chapter "Using a headset", page 23.
You can store two call numbers: the first with red indicator LED, the
second with green indicator LED.
With this function you put your call partner on hold without using a
phone line as a result. For further information refer to chapter "Par-
king a call partner", page 44.
With this function incoming calls are automatically forwarded to a
specific destination. For further information refer to chapter "Activa-
ting protection against call types", page 87.
This function activates the loudspeaker and the microphone. For fur-
ther information refer to chapter "Using your phone in hands-free
mode", page 22.
With this function the phone rings only once. For further information
refer to chapter "Activating/deactivating a discreet ring", page 61.
This function allows you to activate/deactivate the greeting you want.
For further information refer to chapter "Managing personal greeting",
page 90.
This function lets you specify which of your phones signals incoming
calls acoustically (as part of the one-number user concept). For fur-
ther information refer to chapter "Activating ring alone", page 63.
This function lets you specify where incoming calls are routed to (as
part of the one-number user concept). For further information refer to
chapter "Activating personal call routing", page 62.
Menu for selecting the personal call routing. For further information
refer to chapter "Activating personal call routing", page 62.
With this function the phone does not ring. For further information
refer to chapter "Setting the ringing properties", page 78.
Personalizing your phone
99