Mitel MiVoice 5380 User Manual page 61

<Phone number>
Activating/deactivating a discreet ring
You do not want to be disturbed by your phone ringing. However, you do not want to
switch off your phone.
Discreet ringing is available on your phone as an alternative to the usual ringing. If dis-
creet ring is activated, the phone rings only once.
This function must be stored under a Foxkey or a function key (see Chapter "Configuring
keys", page 93).
Discreet ring
Suppressing your call number from your called party's terminal
display
You do not want your call number to appear on the terminal display of a called party in the
public network.
You have two possibilities:
• If you never want the phone number to be displayed, set
• To suppress your call number display for certain calls only, select the
before dialling your party's call number.
call
This function must be stored under a Foxkey or a function key (see Chapter "Configuring
keys", page 93).
You can also execute the function with a function code (see User Guide Function Codes
on the Mitel DocFinder).
CLIR
MiVoice 5380 / MiVoice 5380 IP
eud-1679/1.0 – R3.0 – 08.2015
Enter your own phone number and confirm with the
You are now connected with the person who is trying to reach you.
➔
Note:
You can also answer a general bell using the */# procedure *82 (personal
ringing pattern) and *83 (ringing signal).
In the idle state:
Press the function key for
Discreet call is activated,
➔
Before the call:
Press the function key for CLIR.
Notes:
• CLIR works only with external calls.
• This feature depends on the range of services offered by your provider.
Discreet ring.
is displayed.
CLIR
Supplementary features
Foxkey.
Ok
Permanent.
functionCLIR Per
61