Mitel MiVoice 5380 User Manual page 40

Supplementary features
Reject
End call
Starting an announcement
You want to address internal users directly via their loudspeaker – where available –,
without waiting for a reply (similar principle to that of an intercom system).
Requirement: It is essential that the internal user has not barred his phone against
announcement (for configuration see the chapter "Activating protection against call
types", page 87).
Notes:
• Intercom (duplex mode) is a special form of announcement whereby the phone of the
called user immediately transforms your announcement into an internal connection.
Depending on the system configuration your call party can answer your announcement
directly in intercom, without having to press a key. Contact your system administrator
for more information.
• If the called user has several phones in the one number user concept with activated
hands-free, any phone (the quickest) answers the call.
Announcement
<Destination>
<Phone number>
40
Rejecting the call:
Press the Foxkey or the End key.
Reject
➔ You remain connected with your original call partner. Depending on
the system configuration the call-waiting party hears the busy tone or
he is forwarded to a preconfigured destination.
Ending a current call:
Press the Foxkey.
End call
The first call is terminated. You are now connected with the party who
➔
initiated the call waiting.
Pick up the handset.
Press the
Announcement
Select destination (User
Enter the phone number and confirm with the
User is made aware of the announcement. You can now talk.
➔
Note:
You can also search in the phone book, last-number redial list or call list
for the phone number of the person you are looking for.
Or:
You can also start the announcement using
> User/Group.
Announcement
Foxkey.
or Group) and confirm with the Foxkey.
Ok
Foxkey.
Ok
>
Menu Call features
MiVoice 5380 / MiVoice 5380 IP
eud-1679/1.0 – R3.0 – 08.2015
>