Mitel MiVoice 5380 User Manual page 58

Supplementary features
Actions following an alarm
You obtain an alarm or an appointment reminder on your phone display. Depending on
the system configuration you can choose from the following possible actions.
Confirm
Repeat
Read
Delete
Activating/deactivating DTMF mode
You want to be able to use your phone to control other equipment or to access certain
services, such as remote polling of an answering machine or telebanking. For these ser-
vices you need the DTMF mode.
In the DTMF mode each keystroke generates a tone. If for example you enter a call num-
ber during a call, your call partner will hear the tone signals.
You can specify whether the DTMF mode should be generally activated or deactivated
(see Chapter "Configuring the DTMF mode", page 84). DTMF is activated as the default
dialling mode.
If the DTMF mode is generally deactivated, you can activate it and deactivate it again
temporarily during a call.
DTMF
Reset
58
Confirming the alarm:
Press the Foxkey.
Confirm
Ends the alarm.
➔
Repeating the alarm:
Press the Foxkey.
Repeat
Repeats the alarm.
➔
Reading the alarm:
Press the Foxkey.
Read
Displays detailed information; the alarm is not deleted.
➔
Deleting the alarm:
Press the Foxkey.
Delete
Deletes the alarm.
➔
You're in a call and the DTMF mode is generally deactivated. You
want to activate the DTMF mode temporarily:
Press the Foxkey.
DTMF
The display shows
➔
characters.
Resetting DTMF mode:
Press the Foxkey.
Reset
Note:
When you hang up, the DTMF mode is automatically deactivated again.
DTMF. You can now enter the DTMF
Enter number
MiVoice 5380 / MiVoice 5380 IP
eud-1679/1.0 – R3.0 – 08.2015