Mitel MiVoice 5380 User Manual page 101

To answer a call you can choose between answering directly by pressing the Line key,
picking up the handset, and using automatic hands-free operation.
Answering an external call using automatic hands-free operation is not available.
The following audio settings are possible: Ring, Melody, Speed, Answer.
Notes:
• A Line key can only be allocated to a configurable key.
• To find out how to use a line key, refer to the Chapter "Making calls using the Line key",
111
page .
<long>
Line key
<Audio setting>
Answer
MiVoice 5380 / MiVoice 5380 IP
eud-1679/1.0 – R3.0 – 08.2015
Press the Line key you want and hold it down for a moment.
The display shows the Line key and the properties with which you can
➔
configure the Line key.
Note:
The Personal key is also treated as a line key.
Scroll to and press the
Line key
Set the Audio settings:
Scroll to the required audio settings and press the
the required setting and confirm with the
The setting is stored.
➔
Setting possibilities for ringing:
• for no ringing tone,
Off
and ringing tone
• You can listen to each setting using the
Setting the answering mode:
Scroll to and press the
Answer
Select the required setting and confirm with the
The setting is stored.
➔
Setting possibilities for answering:
to answer the call by pressing the line key,
Key
picking up the handset, and
hands-free.
Notes:
• The and
Handset
nal is activated.
• If you select answer using
ify the Priority, with 1 being the highest priority, and 8 the lowest.
Select
for instant ringing tone After10s,
On
and confirm with
After30s
Modify
Hands-free
settings only work when the ringing sig-
Hands-free
or Hands-free, you must also spec-
Handset
Personalizing your phone
Foxkey.
Foxkey. Select
Modify
Foxkey.
Ok
Foxkey.
Ok
Foxkey.
Test
Foxkey.
Foxkey.
Ok
to answer by
Handset
to answer automatically with
After20s
101