Oce CS6407 Basic Operation Manual page 34

3
Flange holder
Capping unit side
4
CAUTION
- As the media is heavy, carefully carry it with a recommended dolly.
- On carrying the media with two persons, carefully carry it by manually holding the scroller shaft.
- Be careful not to catch your fi nger or hand between the Printer and the scroller shaft.
On carrying the media alone:
Recommended dolly
Flange holder
5
Capping unit side
6
34
Océ 6407 Basic Operation Guide
Knob screw
Shaft holder
Wiping unit side
Printer rear
Shaft holder
Knob screw
Wiping unit side
Front cover
Protection bar
Remove the fl ange holder, and open the shaft
holder.
To open the shaft holder, loosen the knob screw.
Load the media roll into the Printer's rear side
(supply side).
On carrying the media manually by two persons:
Set the fl ange holder, and close the shaft holder.
After closing the shaft holder, fasten the knob screw.
Remove the protection bar and open the front
cover.
Scroller shaft