Appendix; Basic Specifi Cations - Oce CS6407 Basic Operation Manual

Appendix

Basic specifi cations

Item
Print method
Resolution
Print speed
Media supply/takeup
direction
Media type
Media width
Ink pack
Interface
Noise
Calorifi c power
Guaranteed print area
Power supply voltage
Input power voltage
range
Power consumption
External dimensions
Mass
Print ensuring
temperature/humidity
Operating temperature/
humidity
Storage temperature/
humidity
Installation space
Maintenance space
92
Océ 6407 Basic Operation Guide
Piezo-type color inkjet printing
720 dpi (main scanning direction) X 360 dpi (subscanning direction),
540 dpi X 540 dpi, 720 dpi X 720 dpi, 720 dpi X 900 dpi
27 m2/h for 72-inch width at 8-pass NORMAL1 8-coror mode (depending on
ambient temperature and print head temperature)
Rear: Supply side, Front: Take-up side
Vinyl/Banner/Mesh banner/Backlit banner (FF)/Solvent printing coated paper
Max. 74 inches (1900 mm)
Normal solvent ink (8 colors) (black, cyan, magenta, yellow, light cyan, light
magenta, gray, light gray)
1500 ml for each color
USB 2.0
Standby: 50 dB (A) or less
Operating: 60 dB (A) or less (continuous sound) excluding supply/takeup motor
noise and ink charging noise
15552KJ/H
Area excluding top/bottom margins (5 mm) and right and left margins (5 mm)
(When media edge guards are used, right and left margins are 10 mm.)
Printer power supply: 200 to 240 VAC, 6 A, 50/60 Hz
Heater power supply: 200 to 240 VAC, 12 A, 50/60 Hz
Printer power supply: 180 to 260 VAC ±10%, 50/60 Hz ±1 Hz
Heater power supply: 180 to 260 VAC ±10%, 50/60 Hz ±1 Hz
Printer power supply: 1440 W or less
Heater power supply: 2880 W or less
3383.5mm (W) X 1275mm (D) X 1511mm (H) ± 10mm
450 kg or less (excluding media and ink)
20 to 25°C, 40 to 60%RH (no condensation)
15 to 30°C, 30 to 70%RH (no condensation)
5 to 35°C, 10 to 80%RH (no condensation)
Min. 4183 mm (W) X 3275 mm (D) X 2200 mm(H)
Min. 4183 mm (W) X 3275 mm (D) X 2200 mm(H)
Specifi cation / Function