Replace A Wiper Blade - Oce CS6407 Basic Operation Manual

Replace a wiper blade

The following describes the wiper blade replacement procedure.
Replace the wiper blade when the replacement message appears or scratches are found at a daily inspection.
Prepare the tweezers supplied in the daily maintenance kit before replacing the wiper blade.
1
2
3
4
90
Océ 6407 Basic Operation Guide
Open the front cover and wiping cover.
Using the tweezers, remove the wiper blade.
First pull the bottom of the wiper blade to
release the hook of the plastic projection.
Then pull the wiper blade out from its slot.
Install a new wiper blade.
Nip the rubber of the new wiper blade with the
tweezers and insert it straight downward, and install
it by hooking the hole in the rubber to the plastic
projection.
Check that the wiper blade's two positions circled in
the fi gure below are installed correctly as the fi gure
shows.
Rubber