Table of Contents
Advertisement
16
S E L E C T M E D I A
R O L L / S H E E T : R O L L
17
S E L E C T M E D I A
M E D I A : P A P E R
• • •
S E L E C T M E D I A
M E D I A : B a n n e r
18
S E T R E M A I N I N G M E D I A
✻ ✻ ✻ ✻ m
C H E C K
S L A C K E N M E D I A
Adjust the tension bar l ength.
19
To print in TENSION winding mode: Conform the tension bar length with the media width.
The table below lists the tension bar combination and the tension bar's total length. Referring to the list, apply
the tension bar length nearest to the media width.
To print without winding: The table below lists the tension bar combination and the tension bar's total length.
Referring to the list, apply the tension bar length nearest to the media width.
Tension bar length
16 inches (41 cm)
16 inches (41 cm)
S
26 inches (66 cm)
ML
48 inches (123 cm)
L
When the tension bar is almost same as the media width, or is slightly longer than the media width, set the
tension bar with screws to the tension bar.
Tension
bar fl ange
with screw
Examples of tension bar combinations
Applied size
S
S
ML
S, S
ML, S
L
ML, S, S
L, S
L, ML
Tension bar
Press the
key.
Select [Banner] and press the
With the
or
keys, select a media preset for
the current media type.
Enter the remaining media length and press the
key.
When you do not know the remaining media length,
press the
key without entering the length.
Tension bar's length
16 inch (41cm)
26 inch (66cm)
32 inch (82cm)
42 inch (107cm)
48 inch (123cm)
58 inch (148cm)
64 inch (164cm)
74 inch (189cm)
Tension bar
fl ange with
screw
key.
37
Advertisement
Table of Contents
