Marking Track Numbers - Sony DHC-EX880MD Operating Instructions Manual

Adjusting the recording level
(continued)
5
Stop playing the sound source.
6
Press ·∏ on the MD deck (or
MDP
Recording starts.
7
Start playing the source to be
recorded.
To stop recording
Press p on the MD deck.
Tip
When recording from this system's tuner (radio) or
from the optional TC-TX770 tape deck to an MD, we
recommend you set REC LEVEL to the 4th or 5th
bar of the level meter. The recorded volume is
roughly the same as the volume heard during
recording.
52
on the remote).
Marking track
numbers
You can mark track numbers:
• Automatically while recording
Track numbers are automatically marked
as on the original source during CD and
MD digital recording.
Use the Level Synchro Recording feature to
automatically mark track numbers while
recording other sources.
• At any point while recording
You can mark track numbers at any time
while recording, regardless of the type of
sound source.

Marking track numbers

automatically while
recording
— Level Synchro Recording
The Level Synchro Recording feature is
factory set to on, so track numbers are
automatically marked. If "LEVEL-SYNC"
does not appear in the display during
recording, follow the procedure below and
turn on Level Synchro Recording.
Track numbers are automatically marked
when the input signal continues to be under a
certain level for more than two seconds and
then returns to the previous level.
0 10
)
n
0
N
5 1 2
= +
·∏
p
§
p
2 3,4