Sony DHC-EX880MD Operating Instructions Manual page 18

Table of Contents

Advertisement

Recording a CD on an MD
(continued)
Step 2: Recording
5
Press PUSH OPEN on the MD deck
and open the door.
6
Insert a recordable MD to MD 1 of
the MD deck and close the door.
Note
When using CD Synchro Recording, you can
only record the MD loaded to MD 1.
With the
arrow
pointing
toward the
0
10
=
+
deck
)
n
0
p
N
With the
label side up
7
Press CD SYNC on the MD deck.
8
Turn SELECTOR on the MD deck
until “NORMAL ?” appears.
9
Press ENTER/YES on the MD deck.
The MD deck stands by for recording
and the CD is in pause for playback.
10
Press ·∏ on the MD deck (or
MD P on the remote).
Recording starts.
The CD player and MD deck both stop
when the recording is completed.
To cancel recording
Press p on the MD deck during steps 7 to 10.
To stop recording
Press p on the MD deck.
Ejecting an MD
If an MD is already loaded to MD 1, eject it as
follows:
1 Press §.
The MD appears at the slot.
2 Press PUSH OPEN and open the door of the MD
deck, then remove the MD from the slot.
When recording is completed
Press § and eject the MD. “TOC Writing” flashes
and the MD Table of Contents (TOC) is updated.
While “TOC Writing” is flashing
Do not move the deck or pull out the power cord to
ensure the complete recording. The deck is currently
updating the Table of Contents (TOC).
If the MD runs out of recording time
The CD player and MD deck both stop.
Tip
If you record on an unrecorded or completely
erased (see page 61) MD, the disc title assigned to
the CD (see page 30) is copied as it is to the MD
(Disc Memo Copy).
However, CD text information is not copied in some
cases.
Note
If the MD is record-protected, “Protected” appears
and the MD cannot be recorded.
Press § and eject the MD, then slide close the tab at
the side of the MD to cover the hole (see page 39).
Page 18

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dhc-md717

Table of Contents