Sony DHC-EX880MD Operating Instructions Manual page 16

Playing a CD (continued)
To
Stop play
Pause
Select a track
Find a point in Press 0 or ) during play
a track
Select a CD
Remove a CD
Adjust the
volume
16
Do this
Press p.
Press ·∏ (or CD P on the
remote). Press again to resume
play.
Turn SELECTOR clockwise (to
go forward) or counter-
clockwise (to go back) and
release it when you locate the
desired track (or press CD +
or = on the remote).
While "ALL DISCS" is selected,
turn and hold SELECTOR to
locate other discs and select
tracks.
and release it at the desired
point.
"—OVER—" appears at the end
of the CD.
• Press CD 1 – 3. Play starts
when the button is pressed.
• Press DISC SKIP (or
CD D.SKIP on the remote)
repeatedly so that the
CD 1 – 3 button is lit green.
Press ·∏ (or CD · on the
remote) to play the selected
CD.
If you press DISC SKIP (or CD
D.SKIP on the remote) during
play, the selected CD changes
and the new CD is played.
Press § of the desired CD 1 – 3.
Turn VOLUME (or press VOL
or on the remote).
Tips
• You can switch from another source to the CD
player and start playing a CD just by pressing
·∏ (or CD · on the remote) or the CD 1 – 3
buttons if a CD is loaded on the tray (Automatic
Source Selection).
• You can also select and start playing a track in
step 4.
1 Press DISC SKIP (or CD D.SKIP on the remote)
and select the desired CD.
2 Turn SELECTOR (or press CD = or + on
the remote) until the desired track number
appears.
3 Press ·∏ (or CD · on the remote).
• The CD 1 – 3 button indicators have the following
meanings when lit:
Green: The disc tray is selected or the CD loaded
on the tray is playing.
Orange: A CD is loaded on the tray.
• When a CD is loaded on the tray, the CD 1 – 3
indicator for the tray is lit orange.
• If a CD is not loaded to any of CD 1 – 3, "NO
DISC" appears.
Note
Do not forcibly press the disc tray closed with your
finger, as this may cause CD player trouble. Always
close the tray by pressing the § button for the tray.