Sony DHC-EX880MD Operating Instructions Manual page 20

Playing an MD (continued)
To
Stop play
Pause
Select a track
Find a point in Press 0 or ) during play
a track
Select an MD
Remove an MD 1 Press PUSH OPEN and open
Adjust the
volume
20
Do this
Press p.
Press ·∏ (or MD P on the
remote). Press again to resume
play.
Turn SELECTOR clockwise (to
go forward) or counter-
clockwise (to go back) and
release it when you locate the
desired track (or press MD +
or = on the remote).
and release it at the desired
point.
• Press MD 1 – 3. Play starts
when the button is pressed.
• Press DISC SKIP (or MD
D.SKIP on the remote) so
that the MD 1 – 3 button is lit
green. Press ·∏ (or
MD · on the remote) to
play the selected MD.
If you press DISC SKIP (or MD
D.SKIP on the remote) during
play, the selected MD changes
and the new MD is played.
the door of the MD deck.
2 Press § and remove the MD
from the slot.
Turn VOLUME (or press VOL
or on the remote).
Tips
• You can switch from another source to the MD
deck and start playing a MD just by pressing ·∏
(or MD · on the remote) or the MD 1 – 3 buttons
if an MD is loaded in the slot (Automatic Source
Selection).
• You can also select and start playing a track in
step 5.
1 Press DISC SKIP (or MD D.SKIP on the remote)
and select the desired MD.
2 Turn SELECTOR (or press MD = or + on
the remote) until the desired track number
appears.
3 Press ·∏ (or MD · on the remote).
• The MD 1 – 3 button indicators have the following
meanings when lit.
Green: The slot is selected or the MD loaded in
the slot is playing.
Orange: An MD is loaded in the slot.
• When an MD is loaded in the slot, the MD 1 – 3
indicator for the slot is lit orange.
• If an MD is not loaded to any of MD 1 – 3, "NO
DISC" appears.