Yealink W52P Configuration Manual page 53

#Enable or disable the no answer forward, 0-Disabled(default), 1-
Enabled;
#Configure the waiting ring times before forwarding, ranges from 0 to 20
(by default);
account.1.timeout_fwd.enable =
account.1.timeout_fwd.target =
account.1.timeout_fwd.timeout =
account.1.timeout_fwd.off_code = %BWFAC-CFNA-DEACTIVATE-1%
account.1.timeout_fwd.on_code = %BWFAC-CFNA-ACTIVATE-1%
########################################################################
##
########################################################################
#Configure the DND key mode; 0-Phone mode (default), 1-Custom mode.
features.dnd_mode =
#Enable or disable the DND feautre for account1; 0-Disabled (default),
1-Enabled;
account.1.dnd.enable = %BWDND-BINARY-1%
#Configure the DND on code and off code for account1.
account.1.dnd.on_code = %BWFAC-DND-ACTIVATE-1%
account.1.dnd.off_code = %BWFAC-DND-DEACTIVATE-1%
#######################################################################
##
#######################################################################
#Configure the WAN port type; 0-DHCP(default), 1-PPPoE, 2-Static IP
Address;
#Require reboot;
network.internet_port.type =
#Configure the static IP address, submask, gateway and DNS server.
#Require reboot;
network.internet_port.ip =
network.internet_port.mask =
network.internet_port.gateway =
network.primary_dns= %DNS_SERVER_1%
network.secondary_dns = %DNS_SERVER_2%
BROADSOFT PARTNER CONFIGURATION GUIDE – YEALINK W52P IP DECT PHONE
©
2013 YEALINK
DND
Network
##
##
20-BD5392-00
PAGE 53 OF 54