Yealink W52P Configuration Manual page 45

#Enable or disable the phone to complete the blind or attended transfer
through on-hook;
#0-Disabled (default), 1-Enabled;
transfer.blind_tran_on_hook_enable =
transfer.on_hook_trans_enable =
#Enable or disable to access the web user interface of phone using the
http/https protocol;
#0-Disabled,1-Enabled (default);
#Require Reboot;
wui.https_enable =
wui.http_enable =
#Enable or disable the feature key synchronization, 0-Disabled
(default), 1-Enabled;
bw.feature_key_sync = %FEATURE_KEY_SYN%
#######################################################################
##
#######################################################################
#Enable or disable the phone to only accept the certificates in the
Trusted Certificates list;
#0-Disabled, 1-Enabled (default);
security.trust_certificates =
#Set the password of the user or the administrator, the value format
is: user:password or admin:password;
#security.user_password = admin:admin123
security.user_password =
base.pin_code =
#######################################################################
##
#######################################################################
#Specify the web language, the valid values are: English, Chinese_S,
German, Italian and Turkish;
lang.wui = %LANGUAGEWEB%
#######################################################################
##
#######################################################################
#Configure the domain name or the IP address of the NTP server. The
default value is cn.pool.ntp.org.
local_time.ntp_server1 = %SNTP_SERVER_1%
local_time.ntp_server2 = %SNTP_SERVER_2%
#Configure the update interval (in seconds) when using the NTP server.
The default value is 1000.
local_time.interval = 1000
#Configure the daylight saving time feature; 0-Disabled, 1-Enabled, 2-
Automatic (default);
local_time.summer_time = 2
#Configure the DST type when the DST feature is enabled; 0-By Date
(default), 1-By Week;
local_time.dst_time_type = 0
#Configure the start time of DST. The default value is 1/1/0.
#If the DST type is configured as By Date, the value format is
Month/Day/Hour. For example, the value 5/20/10 means the start time is
BROADSOFT PARTNER CONFIGURATION GUIDE – YEALINK W52P IP DECT PHONE
©
2013 YEALINK
Security Settings
Language Settings
Time Settings
##
##
##
20-BD5392-00
PAGE 45 OF 54