Yealink W52P Configuration Manual page 27

5.2.2.2.1.2 Configure Device Management Options
Modify the device profile type Device Management Options as described in the following
table. These are common settings that apply to all devices enabled for Device
Management.
Parameters not identified in the following table can usually be left as the defaults.
Parameter
Device Configuration
Tags
Allow Identity/Device
Profiles to Configure
Custom Tags
Allow Groups to Configure
Custom Tags
Device Access Protocol
Device Access FQDN
Device Access Port
Device Access Context
Name
Device Access URI
BROADSOFT PARTNER CONFIGURATION GUIDE – YEALINK W52P IP DECT PHONE
©
2013 YEALINK
Value
Use Default System Tag Set
and Tag Set
checked
checked
http
<BroadWorks-Xsp-Cluster-
Address>
Example:
xsp.iop1.broadworks.net
<BroadWorks-Xsp-Port>
Example: 80
dms
<device model name>
Example: Yealink_W52P
Description/Notes
Select the device tag set created in
section 5.2.1.2 Create Device Type
Specific Tags.
Optional
Optional
Set to the Xsp cluster FQDN if using
an Xsp farm. Otherwise, set to the
individual Xsp FQDN or IP address.
Should be set to 80.
This does not need to be defined.
BroadWorks defaults to the system-
defined value.
This defines the directory the
Xtended Services Platform uses to
access the configuration files.
20-BD5392-00
PAGE 27 OF 54