Yealink W52p Quick User Manual

Yealink W52p Quick user guide
Introduction
This is a quick guide to using your Yealink W52P. This will show you basic
functions.
To make a call
Enter the number you wish to call then press the key.

Answering a call

To answer a call press the key.
To end a call
To end a call press the key.
Hold/Resume
You can place an active call on hold. At any time, at most one active call can be in progress on your
handset. You can answer or make another call while placing the original call on hold.
To put a call on Hold: Press the options Key and select Hold.
To Resume the call: Press the Resume Key.
If 2 calls are on hold at the same time you can use the up/down arrow or the swap key to swap
between the two calls.
Call mute
While you are on a call you can mute your microphone so the other party will not be able to hear you.
To mute your microphone press the key. To un-mute the microphone press the same key again.

Redial a call

The redial number list stores the last 20 numbers dialled. When the memory of the redial number list
is full, the handset will automatically erase the oldest dialled number to replace it with the newest.
To go to the redial list press the key.

Transfer a call

There are 3 different types of call transfer:
Blind Transfer
To perform a blind transfer during a call, select the Options soft key and then press Transfer. Or you
can press the key directly.
Enter the number or select the handset that you would like to transfer the call to, and then press
Transfer or the key.
Attended Transfer before Answer
To perform an attended transfer before the other party answers the phone, select the Options soft key
and then press Transfer. Or you can press the key directly.
Enter the number or select the handset that you would like to transfer the call to, and then press the
key to dial out.
Once you receive the ring back tone and before the other party answers the phone press Transfer or
the key.