Yealink W52P Configuration Manual page 30

5.2.2.2.2.1 System File
This section identifies the system-level files used by Yealink and provides instructions for
defining the files and uploading for Device Management.
W52P IP DECT Phone model downloads a model-specific system file, named as follows:
 y000000000025.cfg
Add a BroadWorks device profile type file to Yealink W52P IP DECT Phone device profile
for the system file using the settings described in the following table.
Parameters not identified in the following table can usually be left as defaults.
Parameter
Device Access File
Format
Repository File Format
File Category
File Customization
Assign File
Authentication Mode
Device Access HTTP
Authentication
After defining the system file type, upload the corresponding system file template
downloaded from the BroadSoft Xchange. Use the Browse button on the file definition
screen. Be sure to click on Apply after uploading the file.
BROADSOFT PARTNER CONFIGURATION GUIDE – YEALINK W52P IP DECT PHONE
©
2013 YEALINK
Value
<system-file-name>
Example:
y000000000025.cfg
<system-file-name>
Example: y000000000025-
%BWTIMESTAMP%.cfg
Dynamic Per-Type
Administrator
Custom
User Name and Password
Digest
Description/Notes
This is the file name the phone uses to
request the file.
This is the file name as stored on the
Device Management repository.
Only one system file is generated for
the profile type.
This identifies who can customize the
system file template.
This system file is authenticated with
the user name and password.
20-BD5392-00
PAGE 30 OF 54