Yealink W52P Configuration Manual page 44

#Enable or disable the phone to check the new configuration weekly; 0-
Disabled (default), 1-Enabled;
auto_provision.weekly.enalbe = 0
#Configure the week time the phone checks the new configuration.
Applicable when the auto provisioning mode is configured as weekly or
power on + weekly.
auto_provision.weekly.mask = 0123456
auto_provision.weekly.begin_time = 00:00
auto_provision.weekly.end_time = 00:00
#Configure the URL of the auto provisioning server.
auto_provision.server.url =
http://%BWDEVICEACCESSFQDN%:%BWDEVICEACCESSPORT%/%BWDMSCONTEXT%/%BWDEVI
CEACCESSURI%
#Configure the username and password for downloading.
auto_provision.server.username = %DEVICE_ACCESS_USERNAME%
auto_provision.server.password = %DEVICE_ACCESS_PWD%
#Configure the domain name of the PNP server.
auto_provision.pnp_domain_name =
#Configure the PNP vendor information.
auto_provision.pnp_event_vendor =
#Configure the name of the Common configuration file.
auto_provision.common_file_name =
#Enable or disable the DHCP option mode; 0-Disabled, 1-Enabled
(default);
auto_provision.dhcp_enable =
#Configure the value (manufacturer of the device) of DHCP option 60.
auto_provision.dhcp_option.option60_value =
#Configure the custom DHCP option number. It ranges from 128 to 254.
auto_provision.dhcp_option.list_user_options =
#Configure AES key (16 characters) for decrypting the common CFG file.
auto_provision.aes_key_16.com =
#Configure AES key (16 characters) for decrypting the MAC-Oriented CFG
file.
auto_provision.aes_key_16.mac =
#######################################################################
##
#######################################################################
#Enable or disable the phone to keep sending the SIP messages to the
outbound server; 0-Disabled, 1-Enabled (default);
sip.use_out_bound_in_dialog =
#Configure the registration random time (in seconds). It ranges from 0
(default) to 60.
sip.reg_surge_prevention =
#Enable or disable the transferee to display the missed call prompt
when receiving a semi_attended transfer call;
#0-Disabled, 1-Enabled (default);
transfer.semi_attend_tran_enable =
BROADSOFT PARTNER CONFIGURATION GUIDE – YEALINK W52P IP DECT PHONE
©
2013 YEALINK
Phone Features ##
20-BD5392-00
PAGE 44 OF 54