We recommend that you use the accessories provided or approved by 1. To activate, when handset is idle, dial *58*number# and press Yealink. The use of unapproved third-party accessories may result in reduced performance. 2. To de-activate, when handset is idle, dial #58# and press...
Press the Swap soft key to swap between calls. Note: The IP DECT phone should only be used with an original Yealink power Call Transfer adapter (5V/600mA). The charging status of the handset is indicated on the top right-hand corner of the LCD screen.
Page 4
Static: If the base station cannot contact a DHCP server for any reason, you need to To place a call from the local directory: configure the IP address, subnet mask, gateway address, primary DNS 1. Press OK button when the handset is idle, then select Directory. address and secondary DNS address for the base station manually.
2. Enter Telephone Number To edit a contact: 1. Press the OK key to enter the main menu, and then select Directory. • The telephone number is requested. 2. Press to highlight the desired entry. • Enter the 10 digit telephone number supplied by and press OK to 3.
Locking/Unlocking Keypad Note: • The provisioning process disables the phone’s administration account. If Long press when the handset is idle to lock the keypad. you require access to the phone’s management interface, please contact support. Long press again to unlock the keypad. •...