Yealink W52P Configuration Manual page 47

#Configure the return code when refusing a call. The valid values are
404, 480, 486 (default).
features.normal_refuse_code = 486
#Enable or disable the call waiting feature; 0-Disabled, 1-Enabled
(default);
call_waiting.enable = %CALL_WAITING_BINARY%
#Enable or disable the playing of call waiting tone; 0-Disabled, 1-
Enabled (default);
call_waiting.tone =
#Enable or disable the phone to save the call history; 0-Disabled, 1-
Enabled (default);
features.save_call_history =
#Configure the overtime (in minutes) of logging web user interface. It
ranges from 1 to 1000, the default value is 5.
features.relog_offtime = 5
#Enable or disable the phone to deal the 180 SIP message after the 183
SIP message; 0-Disabled, 1-Enabled (default);
phone_setting.is_deal180 = 1
#######################################################################
##
#######################################################################
firmware.url =
http://%BWDEVICEACCESSFQDN%:%BWDEVICEACCESSPORT%/%BWDMSCONTEXT%/%BWDEVI
CEACCESSURI%/%W52_FIRMWARE%
#######################################################################
##
#######################################################################
trusted_certificates.url = trusted_certificates.url =
http://%BWDEVICEACCESSFQDN%:%BWDEVICEACCESSPORT%/%BWDMSCONTEXT%/%BWDEVI
CEACCESSURI%ca.crt
#trusted_certificates.delete = http://localhost/all,delete all the
trusted certificates;
trusted_certificates.delete =
server_certificates.url =
http://%BWDEVICEACCESSFQDN%:%BWDEVICEACCESSPORT%/%BWDMSCONTEXT%/%BWDEVI
CEACCESSURI%server.pem
#server_certificates.delete = http://localhost/all, delete the server
certificate;
server_certificates.delete =
#######################################################################
## Local Contact/DST Time/Replace Rule
#######################################################################
auto_dst.url =
http://%BWDEVICEACCESSFQDN%:%BWDEVICEACCESSPORT%/%BWDMSCONTEXT%/%BWDEVI
CEACCESSURI%Autodst.xml
dialplan_replace_rule.url =
http://%BWDEVICEACCESSFQDN%:%BWDEVICEACCESSPORT%/%BWDMSCONTEXT%/%BWDEVI
CEACCESSURI%DialPlan.xml
blacklist.url =
http://%BWDEVICEACCESSFQDN%:%BWDEVICEACCESSPORT%/%BWDMSCONTEXT%/%BWDEVI
CEACCESSURI%blacklist.xml
BROADSOFT PARTNER CONFIGURATION GUIDE – YEALINK W52P IP DECT PHONE
©
2013 YEALINK
Configure a server URL for firmware update
Certificates
##
##
##
20-BD5392-00
PAGE 47 OF 54