Yealink W52P Configuration Manual
  1. Manuals
  2. Brands
  3. Yealink Manuals
  4. IP Phone
  5. Telkom W52P
  6. Configuration manual

Yealink W52P Configuration Manual

Ip dect phones integrated with metaswitch
Hide thumbs Also See for W52P:
Table of Contents

Advertisement

Quick Links

See also: Admin Manual , Full User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the W52P and is the answer not in the manual?

Questions and answers

Related Manuals for Yealink W52P

Summary of Contents for Yealink W52P

  • Page 2 Copyright © 2015 YEALINK NETWORK TECHNOLOGY CO., LTD. Copyright © 2015 Yealink Network Technology CO., LTD. All rights reserved. No parts of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, photocopying, recording, or otherwise, for any purpose, without the express written permission of Yealink Network Technology CO., LTD.
  • Page 3 3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4. Consult the dealer or an experience radio/TV technician for help. Note: Changes or modifications not expressly approved by Yealink Network Technology Co., Ltd could void the user's authority to operate the equipment.
  • Page 4 Do not dispose of WEEE as unsorted municipal waste and have to collect such WEEE separately. We are striving to improve our documentation quality and we appreciate your feedback. Email your opinions and comments to DocsFeedback@yealink.com.
  • Page 5 Yealink W52P IP DECT phone firmware contains third-party software under the GNU General Public License (GPL). Yealink uses software under the specific terms of the GPL. Please refer to the GPL for the exact terms and conditions of the license.
  • Page 6 Yealink W52P IP DECT phones conform to Generic Access Profile (GAP) standard to support some features (e.g., Call Encryption and Registration Management) defined in the GAP. It should be noted that Yealink W52P IP DECT phones are not compatible with the base station and handset from other manufacturers.

  • Page 7: About This Guide

    About This Guide Yealink W52P IP DECT phone is a full-featured mobile device, which can provide reliable and convenient wireless voice communications. In addition, it provides many widely accepted benefits of the DECT standard, including high security, scalability, and low power consumption to better meet your requirements.
  • Page 8 Yealink W52P IP DECT Phones Configuring Guide...

  • Page 9: Table Of Contents

    In This Guide ......................... v Table of Contents ..............v Getting Started ................. 1 Packaging Contents ......................1 Connecting the W52P Base Station ..................3 Setting up the W52P/W52H Handset ..................4 Setting up the Charger Cradle ....................6 Charging the Handset ......................6 Overview .................. 9 Base Station Description ......................9...
  • Page 10 Yealink W52P IP DECT Phones Configuring Guide Checking System Status ....................25 Account Registration ......................25 Turning Handset On/Off ....................27 Adjusting Ringer Volume ....................27 Locking/Unlocking Keypad ....................27 Locating a Handset......................28 Switching Silent Mode On/Off ..................28 Menu Guidance .........................

  • Page 11: Table Of Contents

    Table of Contents Repeater Mode ........................58 DTMF ............................ 59 Call Jump ..........................61 Call Features ................63 Placing Calls ........................63 Placing Internal Calls ...................... 64 Placing External Calls ..................... 64 Off Hook Hot Line Dialing ....................65 Answering Calls........................65 Ending Calls ........................
  • Page 12 Yealink W52P IP DECT Phones Configuring Guide viii...

  • Page 13: Getting Started

    Charging the Handset  If you require additional information or assistance with your new phone, contact your system administrator. The following components are included in your W52P/W52H IP DECT phone packages: W52P Package W52H Package 1 Base Station 1 Handset ...
  • Page 14 Yealink W52P IP DECT Phones Configuring Guide W52P/W52H Handset  Charger Cradle  Power Adapter  Two Rechargeable Batteries ...
  • Page 15 Getting Started Ethernet Cable  Belt Clip  Quick Start Guide  Check the package before installation. If you find anything missing, contact your system administrator. You have two options for power and network connection of the base station. Your system administrator will advise you which one to use.

  • Page 16: Power Over Ethernet

    Yealink W52P IP DECT Phones Configuring Guide and the Internet port in your network or the switch/hub device port. Power over Ethernet Using a regular Ethernet cable, the base station can be powered from a PoE-compliant (IEEE 802.3af) switch or hub.
  • Page 17 The operating time of your handset depends on the capacity and age of the batteries and the way they are used. We recommend you use only the batteries that came with the handset or replacement batteries approved by Yealink technology: Sanyo NiMH 800 ...
  • Page 18 After setting up the handset and charger cradle, place the handset in the charger cradle. The original handset included in the W52P package is pre-registered to the base station. After charging, the handset is ready for use. Battery Charging Status The handset batteries take 6 hours to fully charge.
  • Page 19 Getting Started 25% Charged 10% Charged Almost Flat...
  • Page 20 Yealink W52P IP DECT Phones Configuring Guide...

  • Page 21: Overview

    Overview This chapter provides the overview of the W52P IP DECT phone. Topics include: Base Station Description  Handset Description  Displaying Information on LCD Screen  Icon Instructions  If you require additional information or assistance with your new phone, contact your system administrator.
  • Page 22 Slow flashes green when the base station is during the ④ Power Indicator LED resetting process. Illuminates solid green when the base station is powered on. The main hardware components of the W52P/W52H handset are the LCD screen and the keypad.
  • Page 23 Overview Hardware component instructions of the W52P/W52H handset are: Item Description ① Earpiece Outputs audio during the earpiece call. Shows call information, handset status icons, prompt ② LCD Screen messages and so on. Label automatically to identity their context-sensitive ③...
  • Page 24 Yealink W52P IP DECT Phones Configuring Guide The idle screen may be shown as below: Status Line Text Line Soft Key Line The LCD screen is divided into three parts: status line, text line and soft key line. The information shown in the status line: On hook (idle) —...
  • Page 25 Overview Icons appearing on the LCD screen are described in the following table: Icon Description Anonymous Call Anonymous Call Rejection Missed Call Voice Mail Keypad Lock Silent Mode Do Not Disturb Call Forward Call Hold Call Mute Unassigned Outgoing Line Unusable Line Loudspeaker On Headset Mode On...
  • Page 26 Yealink W52P IP DECT Phones Configuring Guide...

  • Page 27: Configuration Interfaces

    Configuration Interfaces This guide describes how to configure Yealink SIP IP phones via the following interfaces: Phone User Interface  CommPortal Phone Configurator  The hardware components keypad and LCD screen constitute the phone user interface, which allows the user to execute all call operation tasks and basic configuration changes directly on the phone.
  • Page 28 Yealink W52P IP DECT Phones Configuring Guide The CommPortal Phone Configurator is an online graphical user interface for the Metaview SIP provisioning server. Administrators and end users can configure the features for the IP phones using a simple and intuitive interface. For more information, refer to: www.metaswitch.com.

  • Page 29: Downloading Configuration Files

    Yealink IP phones support MAC authentication method to deploy phones. For more information on MAC authentication, refer to: www.metaswitch.com. Yealink IP phones also support HTTP digest authentication as defined in RFC 2617 to deploy phones. The system administrator only needs to provide authentication user name and password to the users, and then users can complete phone deployment on their own.

  • Page 30: Configuring The Update Mode

    The update mode is used to set the desired time to trigger the IP phone to perform the auto provisioning process. Yealink W52P phones support many update modes. Here we take the followings as examples to introduce how to trigger the phone to perform auto provisioning.
  • Page 31 Downloading Configuration Files The phone can obtain the provisioning server address by detecting DHCP options 66/ contacting RPS/Phone Flash when it is powered on, and then the phone will perform the auto provisioning process to download configuration files. To trigger auto provisioning via power on: Press to enter the main menu.
  • Page 32 Yealink W52P IP DECT Phones Configuring Guide Click on Phone->Auto Provision. Click Autoprovision Now. The IP phone will perform the auto provisioning process immediately.

  • Page 33: Basic Operations

    If you require additional information or assistance with your new phone, contact your system administrator. You can register up to 5 handsets to one W52P base station. Each handset can be registered to 4 different base stations. To register a handset manually via the handset: Long press on the base station.
  • Page 34 Yealink W52P IP DECT Phones Configuring Guide indicates the handset is registered successfully. After successful registration, an internal handset number and handset name appear on the LCD screen. To de-register a handset via the handset: Press to enter the main menu.
  • Page 35 Basic Operations To configure a static IPv4 address via CommPortal phone configurator: Click on Network >IP Setting. Select Static IP Address from the Internet Port Type for IPV4 pull-down list. Enter the desired values in the Static IP Address, Subnet Mask, Gateway, Primary DNS and Secondary DNS fields respectively.
  • Page 36 Yealink W52P IP DECT Phones Configuring Guide Example: The user registers a SIP account for the IP phone and then set the value of Timer T1, Timer T2 respectively (Timer T1: 0.5, Timer T2: 4). The SIP registration request message will be re-transmitted between the IP phone and SIP server.
  • Page 37 Basic Operations You can view the system status on your handset. Available information of the system status includes: Base station status (e.g., IP address, firmware version, MAC address and device  certificate status of the base station) Handset status (e.g., hardware version, model, IPUI code and firmware version of ...
  • Page 38 Yealink W52P IP DECT Phones Configuring Guide To register an account via CommPortal phone configurator: Click on Line X->User. Enter the desired values in Directory Number and Display Name fields respectively. Select the desired value from the Description field. Depending on your selection: If you select Use directory number, the directory number will act as the account label to be displayed on the idle screen.
  • Page 39 Basic Operations To turn the handset on via the handset: Do one of the following: Long press until the LCD screen lights up. Place the handset in the charger cradle. The handset will be turned on automatically. To turn the handset off via the handset: Long press again when the handset is idle.
  • Page 40 Yealink W52P IP DECT Phones Configuring Guide To unlock the keypad via the handset: Long press again until the LCD screen prompts “Keypad Unlocked”. The keypad is unlocked and the icon disappears from the idle screen. Note If the keypad is locked, only the emergency numbers can be dialed out. You must enter the emergency number continuously.

  • Page 41: Main Menu

    Basic Operations The handset menu has a number of levels. The main menu is the top-level menu, which consists of six menu items: Status, Intercom, Voice Mail, Call Features, Directory and Settings. To enter the main menu via the handset: Press when the handset is idle.
  • Page 42 Yealink W52P IP DECT Phones Configuring Guide...

  • Page 43: Repeater Mode

    Customizing Your Phone This chapter provides you with some instructions on how to change the settings of your phone. Topics include: Handset Name  Language  Ring Tones  Advisory Tones  Backlight  Screen Saver  Color Schemes  Keypad Light ...

  • Page 44: Handset Name

    Yealink W52P IP DECT Phones Configuring Guide The handset will be assigned a name by default if successfully registered to the base station. You can personalize the handset name. To rename the handset via CommPortal phone configurator: Click on Handsets->Handset X.

  • Page 45: Ring Tones

    Customizing Your Phone Select the desired value from the Handset Interface Language field. Click Save changes to accept the change. Perform auto provisioning on the phone to download above configurations. For more information on how to perform auto provisioning, refer to Downloading Configuration Files on page 17.

  • Page 46: Advisory Tones

    Yealink W52P IP DECT Phones Configuring Guide Advisory tones are acoustic signals of your handset, which inform you of different actions and states. The following advisory tones can be configured independently: Keypad Tone: plays when a user presses any key of the keypad.

  • Page 47: Backlight

    Customizing Your Phone Handset backlight status in the charging state or out of the charging state can be configured independently of each other. If enabled, the backlight is always on. Otherwise, the backlight is turned off after the handset is idle for a period of time. But the backlight is automatically turned on when an incoming call arrives, a key is pressed or the status of handset changes.

  • Page 48: Screen Saver

    Yealink W52P IP DECT Phones Configuring Guide The screen saver of the handset is designed to protect your LCD screen by filling it with an analog clock. You can enable the screen saver to protect the LCD screen if you do not use your handset for a long time.

  • Page 49: Keypad Light

    Customizing Your Phone Select the desired value from the Color Schemes pull-down list. Click Save changes to accept the change. Perform auto provisioning on the phone to download above configurations. For more information on how to perform auto provisioning, refer to Downloading Configuration Files on page 17.

  • Page 50: Time & Date

    Yealink W52P IP DECT Phones Configuring Guide configure the notification light to indicate the voice mails or missed calls respectively. To configure notification light via t CommPortal phone configurator: Click on Preferences-> Notification Light. Mark the desired radio box of the Voice Mail Notify Light Flash field.
  • Page 51 Customizing Your Phone To configure the NTP server, time zone and DST via CommPortal phone configurator: Click on Preferences->Time&Date. Select NTP from the Obtain Time Method pull-down list. Select the desired time zone that applies to your area from the Time Zone pull-down list.
  • Page 52 Yealink W52P IP DECT Phones Configuring Guide Day. The mapping is: For Month: 1=Jan, 2=Feb,…, 12=Dec;  For Day of Week: 1=Jan, 2=Feb,…, 12=Dec;  For Day of Week Last in Month: 1=the first week in a month,…, 5=the ...

  • Page 53: Shortcuts

    Customizing Your Phone Select the desired date format from the Date Format pull-down list. Click Save changes to accept the change. Perform auto provisioning on the phone to download above configurations. For more information on how to perform auto provisioning, refer to Downloading Configuration Files on page 17.

  • Page 54: Local Directory

    Yealink W52P IP DECT Phones Configuring Guide To configure a shortcut via the handset: Press to enter the main menu. Select ->Shortcut. The LCD screen displays the changeable shortcuts with features currently assigned to them. Press to highlight the desired shortcut.
  • Page 55 Customizing Your Phone To configure the input method via the handset: The handset provides you with 12 different input methods. You can disable the infrequently used input method. Then you can only switch among the enabled input methods when editing. Press to enter the main menu.
  • Page 56 Yealink W52P IP DECT Phones Configuring Guide Enter the desired values in the Name, Number and Mobile fields respectively. Press the Save soft key to accept the change or the Back soft key to cancel. To add a contact to the local directory from the call history via the handset: Press the History soft key when the handset is idle.

  • Page 57: Blacklist

    Customizing Your Phone To delete all contacts via the handset: Press to enter the main menu. Select Press the Options soft key, and then select Delete All. The LCD screen prompts “Delete All?”. Press the Yes soft key to delete all contacts or the No soft key to cancel. You can search for the contacts by simply entering a few continuous characters of the desired contact name or number, and the results of potential matches are dynamically filtered and displayed on the LCD screen.

  • Page 58: Remote Phone Book

    Yealink W52P IP DECT Phones Configuring Guide from a contact in the blacklist will be rejected automatically. To add an entry to the blacklist manually via the handset: Press to enter the main menu. Press ->Telephony->Caller Blacklist. Press the Options soft key, and then select New Entry.
  • Page 59 Customizing Your Phone contact from the remote phone book. Contact your system administrator for the access URL of the remote phone book. To configure an access URL for a remote phone book the CommPortal phone configurator: Click on Features->Remote Phone Book. Enter the access URL in the Remote Phonebook URL N field.
  • Page 60 Yealink W52P IP DECT Phones Configuring Guide Press , if only one number is stored for the contact in the remote phone book, the contact number will be dialed out directly.. If multiple numbers are stored for the contact, press...
  • Page 61 Customizing Your Phone The LCD screen displays all entries of the selected list. Press to highlight the desired entry. Press the Options soft key, and select Add To Blacklist. The LCD screen prompts “Are you sure?”. Press the Yes soft key to add the selected entry to the blacklist or the No soft key to cancel.

  • Page 62: Emergency Numbers

    Yealink W52P IP DECT Phones Configuring Guide Public telephone networks in countries around the world have a single emergency telephone number (emergency services number), that allows a caller to contact local emergency services for assistance when necessary. The emergency telephone number may differ from country to country.

  • Page 63: Incoming Lines

    Customizing Your Phone Mark the desired line in the Outgoing Allowed Lines field. Click Save changes to accept the change. Perform auto provisioning on the phone to download above configurations. For more information on how to perform auto provisioning, refer to Downloading Configuration Files on page 17.

  • Page 64: Speed Dial

    Yealink W52P IP DECT Phones Configuring Guide Mark the desired line in the Incoming Allowed Lines field. Click Save changes to accept the change. Perform auto provisioning on the phone to download above configurations. For more information on how to perform auto provisioning, refer to...

  • Page 65: Intercom

    Customizing Your Phone If only one number is stored for the contact in the selected directory, press the OK soft key to assign the number to the selected speed dial key. If multiple numbers are stored for the contact in the selected directory, press the OK soft key to display the two numbers.
  • Page 66 Yealink W52P IP DECT Phones Configuring Guide Beep On: Auto intercom feature is on. The handset will answer an incoming internal  intercom call automatically and play a warning tone. Beep Off: Auto intercom feature is on. The handset will answer an incoming internal ...

  • Page 67: Base Restart

    Customizing Your Phone Select the desired value from the Intercom Auto Answer pull-down list. Click Save changes to accept the change. Perform auto provisioning on the phone to download above configurations. For more information on how to perform auto provisioning, refer to Downloading Configuration Files on page 17.

  • Page 68: Base Reset

    Yealink W52P IP DECT Phones Configuring Guide Select ->System Settings->Handset Reset. The LCD screen prompts “Reset handset to default?”. Press the Yes soft key to reset the handset or the No soft key to cancel. You can reset the base station to factory settings. This will clear all individual settings of the base station (e.g., directory and account registrations).

  • Page 69: Eco Mode

    Customizing Your Phone Mark the desired radio box in the Base ECO Mode field. Click Save changes to accept the change. Perform auto provisioning on the phone to download above configurations. For more information on how to perform auto provisioning, refer to Downloading Configuration Files on page 17.
  • Page 70 Yealink W52P IP DECT Phones Configuring Guide Mark the desired radio box in the Headset ECO Mode field. Click Save changes to accept the change. Perform auto provisioning on the phone to download above configurations. For more information on how to perform auto provisioning, refer to...

  • Page 71: Dtmf

    To use repeater mode, make sure both the base station and handset are upgraded to the supported firmware version (x.73.202.1or later). Yealink For more information on how to use DECT repeater with the base station, refer to DECT Repeater RT10 User Guide DTMF (Dual Tone Multi-frequency), better known as touch-tone, is used for telecommunication signaling over analog telephone lines in the voice-frequency band.
  • Page 72 Yealink W52P IP DECT Phones Configuring Guide 1209 Hz 1336 Hz 1447 Hz 1633 Hz 852 Hz 941 Hz Three methods of transmitting DTMF digits on SIP calls: RFC 2833 -- DTMF digits are transmitted by RTP Events compliant to RFC 2833.

  • Page 73: Call Jump

    Customizing Your Phone The default value is RFC2833. If SIP INFO or AUTO or SIP INFO is selected, select the desired value from the pull-down list of DTMF Info Type. Enter the desired value in the DTMF Payload Type (96~127) field to configure the RFC 2833 payload type.
  • Page 74 Yealink W52P IP DECT Phones Configuring Guide To transfer active call to an alternate extension: If C needs to consult A and B frequently, A can dial *95 to jump the call to B during a call with C, then C can continue consulting B. Before B answers the call, A and C will stay connected.

  • Page 75: Call Features

    Call Features The W52P IP DECT phone is designed to be easily used like a regular phone on a public switched telephone network (PSTN). You can place internal and external calls, answer calls, transfer a call to someone else, or conduct a conference call.

  • Page 76: Placing External Calls

    Yealink W52P IP DECT Phones Configuring Guide the currently engaged audio devices (earpiece, headset or loudspeaker). The call duration is displayed on the LCD screen while the call is in progress. You can make free internal calls between the handsets registered to the same base station.
  • Page 77 You can also make an IP call by directly dialing the IP address of any IP phone. For example, IP: 192.168.1.15. For security reasons, W52P IP DECT phones support off hook hotline dialing feature. When the user dials out a call using a line with this feature enabled, the IP phone will first dial out the preconfigured number to the SIP server the line registers to.
  • Page 78 Yealink W52P IP DECT Phones Configuring Guide Using the headset  You can ignore an incoming call by pressing the Silence soft key or reject an incoming Note call by pressing the on-hook key. You can also activate Do Not Disturb mode on a per-line basis to reject all incoming calls of the specified line.
  • Page 79 Call Features Press again. A call to your last dialed number is attempted. To redial a previously dialed number: Press when the handset is idle. The handset displays the dialed phone numbers. Press to highlight the desired entry. You can press Options->Edit Before Call to edit the phone number or select the desired line by pressing the Line soft key.
  • Page 80 Yealink W52P IP DECT Phones Configuring Guide Press Press Two calls on Hold: If two calls are placed on hold on the handset, press the Resume soft key to resume the current call. Press or the Swap soft key to swap between two calls.
  • Page 81 Call Features To answer a new incoming call during a call via the handset: If call waiting feature is enabled, a new incoming call can be answered during a call. Press the Accept soft key to answer the new incoming call. The original call is placed on hold.
  • Page 82 Yealink W52P IP DECT Phones Configuring Guide Mark the desired radio box in the DND Key Synchronization field. Click Save changes to accept the change. Perform auto provisioning on the phone to download above configurations. For more information on how to perform auto provisioning, refer to...
  • Page 83 Call Features more information on how to perform auto provisioning, refer to Downloading Configuration Files on page 17. You can enable call forward feature on a per-line basis. The handset will forward incoming calls of the line to another party. Three forwarding types: Always Forward: Incoming calls are immediately forwarded.
  • Page 84 Yealink W52P IP DECT Phones Configuring Guide Attended Transfer: Transfer a call with prior consulting.  To perform a blind transfer: Press the Options soft key during a call, and then select Transfer. You can also press directly. Enter the number or select the handset you want to transfer the call to.
  • Page 85 Call Features To transfer a call to another party when there are two calls on the handset via the handset: Place a call to user A. Place another call to user B. Two calls are established on the handset. Select the desired call (e.g., the call with user A) and make sure the call is active. Press the Options soft key, and then select Call Transfer.
  • Page 86 Yealink W52P IP DECT Phones Configuring Guide You can create a conference with other two parties using the phone‟s local conference. You can also create a conference between two calls by pressing the Conf. soft key. You can use the handset to create a local conference with other parties. The handset supports up to 3 parties (including yourself) in a conference call.
  • Page 87 Call Features You can use anonymous call feature to block the identity and phone number from showing up to the called party when you call someone. For example, you want to call to consult some service, but do not want to be harassed. You can configure anonymous call feature on a per-line basis.
  • Page 88 Yealink W52P IP DECT Phones Configuring Guide Press the OK soft key to accept the change. You can leave voice mails to someone else. You can also receive and listen to voice mails via the handset. Voice mail feature ensures that you will never miss any important messages.
  • Page 89 Call Features The LCD screen displays the lines assigned to the handset as incoming lines and outgoing lines simultaneously. Press to highlight the desired line and press the Select soft key. The radio box of the selected line is marked. To listen to the voice mail using the menu via the handset: Press to enter the main menu.
  • Page 90 Yealink W52P IP DECT Phones Configuring Guide Click Save changes to accept the change. Perform auto provisioning on the phone to download above configurations. For more information on how to perform auto provisioning, refer to Downloading Configuration Files on page 17.

  • Page 91: Troubleshooting

    Troubleshooting This chapter provides some general troubleshooting information to help you solve the problems you might encounter when using your W52P IP DECT phone. If you require additional information or assistance with your new phone, contact your system administrator. Why doesn‟t the handset ring? Ensure that the ringer volume of your handset is not adjusted to the minimum.
  • Page 92 Why doesn‟t the power indicator on the base station light up? Plug the supplied power adapter to W52P , if the power indicator doesn‟t light up, it should be a hardware problem. Please contact your vendor or local distributor and send the problem description for help.
  • Page 93 Troubleshooting Why do I hear some noise during a call? Ensure that you are not using the handset or base station in an area with high  electrical interference. You can reposition the handset and the base station to keep them far away from sources of high electrical interference.
  • Page 94 Yealink W52P IP DECT Phones Configuring Guide...

  • Page 95: Appendix

    Appendix Base Status Handset Line Status Intercom Play Message Voice Mail Set Voice Mail Set Key 1 Call Forward Do Not Disturb Call Waiting Call Features Anon. Call Rejection Anonymous Call Local Dir Menu Directory Network Contacts Structure Remote Phonebook Date &...
  • Page 96 Yealink W52P IP DECT Phones Configuring Guide Time Zone Time Zone Name −12 −11:30 −11 Samoa −10:30 −10 US-Hawaii-Aleutian、US-Alaska-Aleutian −9:30 −9 US-Alaska Time −8:30 Canada(Vancouver,Whitehorse), −8 Mexico(Tijuana,Mexicali), US-Pacific Time −7:30 Canada(Edmonton,Calgary), −7 Mexico(Mazatlan,Chihuahua), US-MST no DST, US-Mountain Time −6:30 Canada-Manitoba(Winnipeg), Chile(Easter Islands), −6...
  • Page 97 Appendix Time Zone Time Zone Name Caicos, Chad, Croatia(Zagreb), Czech Republic(Prague), Denmark(Kopenhagen), France(Paris), Germany(Berlin), Hungary(Budapest), Italy(Rome), Luxembourg(Luxembourg), Macedonia(Skopje), Namibia(Windhoek), Netherlands(Amsterdam) +1:30 Estonia(Tallinn), Finland(Helsinki), Gaza Strip(Gaza), Greece(Athens), Israel(Tel Aviv), Jordan(Amman), Latvia(Riga), Lebanon(Beirut), Moldova(Kishinev), Romania(Bucharest), Russia(Kaliningrad), Syria(Damascus), Turkey(Ankara), Ukraine(Kyiv, Odessa) +2:30 East Africa Time, Iraq(Baghdad), Russia(Moscow) +3:30 Iran(Teheran) Armenia(Yerevan), Azerbaijan(Baku), Georgia(Tbilisi),...
  • Page 98 Yealink W52P IP DECT Phones Configuring Guide...

  • Page 99: Regulatory Notices

     bathrooms, laundry rooms and wet basements. Safety Notes During Operation Use only spare parts and accessories supplied or authorized by Yealink. The  operation of non- authorized parts cannot be guaranteed. Do not place heavy objects on top of the handset or the base station in case ...
  • Page 100 Yealink W52P IP DECT Phones Configuring Guide When there is smoke emitted from the product, or some abnormal noise or  smell, disconnect the product from the power supply, and unplug the power adapter immediately. Remove the electrical cord from an outlet by pulling gently on the power ...

  • Page 101: Index

    Incoming Lines Blacklist Information for DECT Product Blind Transfer Important Safety Information Busy Forward In This Guide Index Connecting the W52P Base Station Charging the Handset Keypad Light Checking System Status Copyright Color Schemes Call History Management Language Call Jump...

  • Page 102: Turning Handset On/Off

    Yealink W52P IP DECT Phones Configuring Guide Overview Outgoing Lines Off Hook hotline dialing Packaging Contents Phone Settings Placing a Call from Local Directory Placing a Call Using Speed Dial Key Placing Calls Placing External Calls Placing Internal Calls Power over Ethernet...

Table of Contents