Yealink W52P Configuration Manual page 34

5.2.2.2.2.3 Static Files
Static files are files such as firmware and media files that are not configurable and/or do
not make use of the dynamic BroadWorks Device Management tags. The Yealink W52P
requires the following static files:

<firmware-version>.rom
 contactData.xml
 AutoDST.xml
 DialPlan.xml
 blacklist.xml
 WebItemsLevel.cfg
Add a BroadWorks device profile type file to Yealink W52P device profile for each of the
static files using the settings described in the following table.
Parameters not identified in the following table can usually be left as defaults.
Parameter
Device Access File
Format
Repository File
Format
File Category
File Customization
Assign File
Authentication Mode
BROADSOFT PARTNER CONFIGURATION GUIDE – YEALINK W52P IP DECT PHONE
©
2013 YEALINK
Value
<file-name>
Example:
25.30.0.10.rom
<file-name>
Example:
25.30.0.10.rom
Static
Disallow
Custom
Not set
Description/Notes
This is the file name the phone uses
to request the file.
This is the file name as stored on
the Device Management repository.
Use the same name as the actual
file name.
This is a static file. There are no
dynamic tags in the file.
This file must not be modified.
The static files are not authenticated
so do not select either of the
options.
20-BD5392-00
PAGE 34 OF 54