Yealink W52P Configuration Manual page 46

at 10:00 on May 20.
#If the DST type is configured as By Week, the value format is
Month/Day of Week/Day of Week Last in Month/Hour of Day.
#For example, the value 1/4/2/5 means the start time is at 5 o'clock on
Tuesday of the 4th week in January.
local_time.start_time = 1/1/0
#Configure the end time of DST. The default value is 12/31/23. The
value format is the same to the start time.
local_time.end_time = 12/31/23
#Configure the offset time (in minutes). It ranges from -300 to 300,
the default value is 60.
local_time.offset_time =
#Enable or disable the DHCP time, 0-Disabled (default), 1-Enabled;
local_time.dhcp_time =
#######################################################################
##
#######################################################################
#Configure the area code.
dialplan.area_code.code =
dialplan.area_code.min_len = 1
dialplan.area_code.max_len = 15
#When applying the rule to multiple lines, each line ID separated by
comma.
#e.g. dialplan.area_code.line_id = 1, 2, 3
dialplan.area_code.line_id =
#Configure the block out number. X ranges from 1 to 10.
#dialplan.block_out.number.x =
dialplan.block_out.number.1 =
#When applying the rule to multiple lines, each line ID separated by
comma, e.g. 1,2,3.
#dialplan.block_out.line_id.x =
dialplan.block_out.line_id.1 =
#Configure the dialnow rule for the phone. X ranges from 1 to 10;
#dialplan.dialnow.rule.x =
#dialplan.dialnow.line_id.x =
dialplan.dialnow.rule.1 =
dialplan.dialnow.line_id.1 =
#Configure the replace rule. X ranges from 1 to 10;
#dialplan.replace.prefix.x =
#dialplan.replace.replace.x =
#dialplan.replace.line_id.x =
dialplan.replace.prefix.1 =
dialplan.replace.replace.1 =
dialplan.replace.line_id.1 =
#######################################################################
##
#######################################################################
#Configure the return code when activating DND; 404-No Found, 480-
Temporarily not available (default), 486-Busy here;
#features.dnd_refuse_code = 480
BROADSOFT PARTNER CONFIGURATION GUIDE – YEALINK W52P IP DECT PHONE
©
2013 YEALINK
Dial Plan
Phone Settings
##
##
20-BD5392-00
PAGE 46 OF 54