Yealink W52P Configuration Manual page 51

Dect
Hide thumbs Also See for W52P:
Table of Contents

Advertisement

#Enable or disable the phone to subscribe to the voicemail through the
message waiting indicator; 0-Disabled (default), 1-Enabled;
account.1.subscribe_mwi_to_vm =
#Enable or disable the phone to send the MAC address in the Register
message; 0-Disabled (default), 1-Enabled;
account.1.register_mac =
#Enable or disable the phone to send the line number in the Register
message; 0-Disabled, 1-Enabled (default);
account.1.register_line =
#Configure the interval (in seconds) the phone retries to register when
account 1 fails to register. It ranges from 0 to 1800, the default value
is 30.
account.1.reg_fail_retry_interval =
#Enable or disable the SIP signal encode; 0-Disabled (default), 1-
Enabled (RC 4);
account.1.enable_signal_encode =
#Configure the key for encoding.
account.1.signal_encode_key =
#Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-
AUTO+SIP INFO;
account.1.dtmf.type =
#Configure the RFC2833 payload. It ranges from 96 to 225, the default
value is 101.
account.1.dtmf.dtmf_payload =
#Configure the DTMF info type when using the SIP INFO; 0-Disabled, 1-
DTMF-Relay (default), 2-DTMF, 3-Telephone-Event;
account.1.dtmf.info_type =
#Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN;
account.1.nat.nat_traversal =
#Configure the STUN server address.
account.1.nat.stun_server =
#Configure the STUN server port, the default value is 3478.
account.1.nat.stun_port =
#Enable or disable the NAT keep-alive; 0-Disabled, 1-Enabled (default);
account.1.nat.udp_update_enable =
#Specify the keep-alive interval (in seconds), the default value is 30.
account.1.nat.udp_update_time =
#Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled;
account.1.nat.rport =
#Configure the session timer (in seconds), the default values of T1, T2,
T3 are 0.5, 4, 5.
account.1.advanced.timer_t1 =
account.1.advanced.timer_t2 =
account.1.advanced.timer_t4 =
account.1.codec.1.enable = 1
account.1.codec.1.payload_type = PCMA
BROADSOFT PARTNER CONFIGURATION GUIDE – YEALINK W52P IP DECT PHONE
©
2013 YEALINK
20-BD5392-00
PAGE 51 OF 54

Advertisement

Table of Contents
loading

Table of Contents