Yealink W52P Configuration Manual page 52

account.1.codec.1.priority = 2
account.1.codec.1.rtpmap = 8
account.1.codec.2.enable = 1
account.1.codec.2.payload_type = PCMU
account.1.codec.2.priority = 1
account.1.codec.2.rtpmap = 0
account.1.codec.3.enable = 1
account.1.codec.3.payload_type = G729
account.1.codec.3.priority =3
account.1.codec.3.rtpmap = 18
account.1.codec.4.enable = 1
account.1.codec.4.payload_type = G722
account.1.codec.4.priority = 4
account.1.codec.4.rtpmap = 9
account.1.codec.5.enable = 0
account.1.codec.5.payload_type = G723_53
account.1.codec.5.priority = 5
account.1.codec.5.rtpmap = 4
account.1.codec.6.enable = 0
account.1.codec.6.payload_type = G723_63
account.1.codec.6.priority = 6
account.1.codec.6.rtpmap = 4
account.1.codec.7.enable = 0
account.1.codec.7.payload_type = G726-32
account.1.codec.7.priority = 7
account.1.codec.7.rtpmap = 2
account.1.codec.8.enable = 0
account.1.codec.8.payload_type = iLBC_13_3
account.1.codec.8.priority = 7
account.1.codec.8.rtpmap = 97
account.1.codec.9.enable = 0
account.1.codec.9.payload_type = iLBC_15_2
account.1.codec.9.priority = 7
account.1.codec.9.rtpmap = 97
########################################################################
##
########################################################################
#Enable or disable the always forward, 0-Disabled(default), 1-Enabled;
account.1.always_fwd.enable = %BWCFA-BINARY-1%
#Configure the target phonenumber that the phone will forward the call
to;
account.1.always_fwd.target =
#Configure the on/off code for always forward;
account.1.always_fwd.off_code = %BWFAC-CFA-DEACTIVATE-1%
account.1.always_fwd.on_code = %BWFAC-CFA-ACTIVATE-1%
#Enable or disable the busy forward, 0-Disabled(default), 1-Enabled;
account.1.busy_fwd.enable =
account.1.busy_fwd.target =
account.1.busy_fwd.off_code = %BWFAC-CFB-DEACTIVATE-1%
account.1.busy_fwd.on_code = %BWFAC-CFB-ACTIVATE-1%
BROADSOFT PARTNER CONFIGURATION GUIDE – YEALINK W52P IP DECT PHONE
©
2013 YEALINK
Call Forward ##
20-BD5392-00
PAGE 52 OF 54