Yealink W52P Configuration Manual page 50

Dect
Hide thumbs Also See for W52P:
Table of Contents

Advertisement

account.1.anonymous_call_oncode =
account.1.anonymous_call_offcode =
#Enable or disable the reject anonymous call feature; 0-Disabled
(default), 1-Enabled;
account.1.reject_anonymous_call = %REJECT_ANONYMOUS_CALL_BINARY-1%
#Configure the on code and off code of the reject anonymous call
feature.
account.1.anonymous_reject_oncode =
account.1.anonymous_reject_offcode =
#Configure the SIP port for account 1, the default value is 5060.
account.1.sip_listen_port =
#Configure the register expiry time (in seconds), the default value is
3600.
account.1.expires =
#Enable or disable the 100 reliable retransmission; 0-Disabled, 1-
Enabled (default);
account.1.100rel_enable =
#Enable or disable the resource reservation; 0-Disabled (default), 1-
Enabled;
account.1.precondition =
#Enable or disable the phone to subscribe the register status; 0-
Disabled (default), 1-Enabled;
account.1.subscribe_register =
#Enable or disable the phone to subscribe the message waiting indicator;
0-Disabled (default), 1-Enabled;
account.1.subscribe_mwi =
#Configure MWI subscribe expiry time (in seconds). It ranges from 0 to
84600, the default value is 3600.
account.1.subscribe_mwi_expires =
#Configure the type of SIP header to carry the caller ID; 0-FROM
(default), 1-PAI;
account.1.cid_source =
#Enable or disable the session timer; 0-Disabled (default), 1-Enabled;
account.1.session_timer.enable =
#Configure the refresh session timer interval (in seconds). It ranges
from 1 to 9999.
account.1.session_timer.expires =
#Configure the session timer refresher; 0-Uac (default), 1-Uas;
account.1.session_timer.refresher =
#Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled;
account.1.enable_user_equal_phone =
#Configure the way of encrypting the message; 0-Disabled (default), 1-
Forced, 2-Negotiated;
account.1.srtp_encryption =
#Configure the RTP packet time. The valid values are 0 (Disabled), 10,
20 (default), 30, 40, 50, 60.
account.1.ptime =
BROADSOFT PARTNER CONFIGURATION GUIDE – YEALINK W52P IP DECT PHONE
©
2013 YEALINK
20-BD5392-00
PAGE 50 OF 54

Advertisement

Table of Contents
loading

Table of Contents