Yealink W52P Configuration Manual page 36

5.2.2.2.2.4 Time Zone Alias File
To properly map the BroadWorks configured user time zone to the Yealink W52P phone
setting, a mapping file must be created on the BroadWorks system. This file maps the
BroadWorks time zone settings to the phone's time zone settings. Adding this mapping
file for the device profile type is described in the BroadWorks Device Management
Configuration Guide [2].
This time zone mapping file must be added to the /usr/local/broadworks/bw_base/
conf/dms directory on the Application Server using the following file name format:
TimeZoneAliasLabels_<Device_Type_Name>.properties
For example, if the device type name is Yealink_W52P, the time zone mapping file name
must be TimeZoneAliasLabels_Yealink_W52P.properties. A space in the device name
must be converted to a "+" in the file name.
The file must contain the mapping of BroadWorks time zones values to Yealink time zone
values. The following is an example of the file contents:
US_ALASKA=-9
US_HAWAII=-10
CANADA_PACIFIC_TIME=-8
US_PACIFIC_TIME=-8
US_ARIZONA=-7
CANADA_MOUNTAIN_TIME=-7
US_MOUNTAIN_TIME=-7
CANADA_CENTRAL_TIME=-6
US_CENTRAL_TIME=-6
CANADA_EASTERN_TIME=-5
US_INDIANA=-5
US_EASTERN_TIME=-5
CANADA_ALTANTIC_TIME=-4
CANADA_NEWFOUNDLAND=-3.5
This file should contain all the time zones supported by the Service Provider's
BroadWorks system. The Application server must be restarted to load this file.
The CPE kit contains the time zone properties files defined for the continental U.S. and
Canadian time zones. For other time zone settings, refer to the Yealink W52P IP DECT
Phone User Guide [1]. When using the DTAF import, the TimeZoneAlias files are
automatically copied onto the system.
The BroadWorks Application Server must be restarted for the TimeZoneAlias files to be
picked up by the system
BROADSOFT PARTNER CONFIGURATION GUIDE – YEALINK W52P IP DECT PHONE
©
2013 YEALINK
20-BD5392-00
PAGE 36 OF 54