Printronix T8000 Administrator's Manual page 194

The individual characters for WEP Key 3.
IMPORTANT
Allows you to format WEP Key 4 in ASCII or hexadecimal code.
ASCII
Hexadecimal
Factory Default
This is the encryption strength. The options are 40 bits and 128 bits: 40 bits
are weaker and 128 bits are stronger.
40 bits
128 bits
Factory Default
The individual characters for WEP Key 4.
IMPORTANT
Allows you to set the default WEP key (1-4) or None (0).
Factory Default
IMPORTANT
194
Network > WLAN Params > WEP Key 3
If changed, the printer reboots when it is placed
ONLINE.
Network > WLAN Params > WEP Key 4 Format
Allows you to format WEP Key 4 in ASCII format.
Allows you to format WEP Key 4 in hexadecimal format.
Hexadecimal
Network > WLAN Params > WEP Key 4 Width
Allows you to use 40 bit encryption for WEP Key 4.
Allows you to use 128 bit encryption for WEP Key 4.
128 bits
Network > WLAN Params > WEP Key 4
If changed, the printer reboots when it is placed
ONLINE.
Network > WLAN Params > Default WEP Key
0
If changed, the printer reboots when it is
placed ONLINE.