Same as Host IO > Centronics > Trickle Time
Same as Host IO > Centronics > AutoSW Timeout
Host IO > USB
Same as Host IO > Centronics > Buffer (Kbytes).
Same as Host IO > Centronics > AutoSW Timeout
Host IO > Serial
Same as Host IO > Centronics > Buffer (Kbytes).
Sets the baud rate of the serial interface in the printer. Baud rate is the speed
at which serial data is transferred between the host computer and the printer.
Selections
Factory Default
IMPORTANT
174
Host IO > IEEE-1284 > Trickle Time
Host IO > IEEE-1284 > AutoSW Timeout
Host IO > USB > Buffer (Kbytes)
Host IO > USB > AutoSW Timeout
Host IO > Serial > Buffer (Kbytes)
Host IO > Serial > Baud Rate
600, 1200, 2400, 4800, 9600, 19200, 38400, 57600,
and 115200 baud.
9600 baud
If you select a baud rate that is greater than 19200
and you experience data loss, you may need to
lower the baud rate. You also may need to
increase the Buffer (Kbyes) parameter to improve
performance.