Media - Printronix T8000 Administrator's Manual

Media

Type:
Supply Roll:
Internal Rewinder:
Label Material:
Media Sensing:
Label Taken Sensor:
Automatic Label Peel-Off:
Table 15. Media - General Information
Roll-fed, die-cut continuous or fanfold labels, tags or tickets;
most direct thermal or thermal transfer materials.
8 inch (203 mm) maximum diameter on 1.5-inch (37.5 mm) to
3-inch (76 mm) diameter cores.
Accepts up to a 5-inch diameter roll of label backing.
Thermal transfer plain-coated papers, vinyl, Mylar, metallized
paper, non-woven fabric, fine woven fabric, thermal-visible light
scannable paper, infrared scannable paper, thermal ticket/tag
stock, thermally-sensitive plastic stock.
Horizontally moveable sensor assembly. When set to Mark, it
senses a black mark on the underside of tag or label stock. When
set to Advanced Gap, it detects die-cut labels on liner media and
notches and holes in tag stock. When set to Advanced Notch, it
detects notches or holes that interrupt a dark or black area on the
underside of the media. When set to Disable, it senses no label
indicators or ignores all existing label length indicators on the
installed media. Gap is an alternative to Advanced Gap.
Detects when a printed label is at the printer exit throat. Used
only for Tear-Off and Peel-Off Media Handling modes.
Peels and presents label to the operator, one at a time. Automatic
Label Peel-Off is supported only when the internal rewinder is
installed. (The internal rewinder is a factory- or field-installed
option.)
263