Printronix T8000 Administrator's Manual page 148

This option controls the action of the printer when it receives a Line Feed
code (0A hex) from the host computer. If this feature is enabled, each time
the printer receives a line feed, it inserts an additional carriage return code
(0D hex) into the data stream. Do not use this feature if the host computer
sends carriage returns to the printer.
LF = LF
LF = CR + LF
Factory Default
Application > P-Series Setup > Control Code 06
Control Code 06 defines the function of ASCII code 06 hex (ACK). You can
select an alternate line spacing of 6.0, 8.0, or 10.3 LPI.
Selections
Factory Default
Application > P-Series Setup > Control Code 08
Control Code 08 defines the function of ASCII code 08 hex (BS). You can
define the code to output an Elongated character or a Backspace.
Elongated
Backspace
Factory Default
Overstrike determines the action required when a line is printed over a
previous line because a carriage return was received without a line feed.
Disable
Enable
Factory Default
148
Application > P-Series Setup > Define LF Code
Does not insert a carriage return before each line feed.
The next print position will be the current print position
of the next line.
Inserts an extra carriage return before each line feed.
The next print position will be print position 1 of the
next line.
LF = CR + LF
6.0, 8.0, or 10.3 LPI
8.0 LPI
Application > P-Series Setup > Overstrike
Replaces the characters from the first line with the
second line.
Prints the second line on top of the first line making it
bolder.
Enable
Output and Elongated character
Output and Backspace character
Elongated