Tools > Diagnostics - Printronix T8000 Administrator's Manual

Novram Err Log
Print Quality
ODV Report
Factory Default
This item selects the number of times the selected test pattern will be
printed.
Continuous
Selections
Factory Default
Tools > Diagnostics
This executable menu prints the current log of errors. Most non-routine faults
(RIBBON FAULT, PRINT HEAD HOT) are stored in the error log.
This executable menu clears the error log.
202
Tools > Print Tests > Run Tests
Prints detailed information about the most recent
Novram related failure. This option is useful when the
control panel faults with "Bad NVM" or "ILL NVM" type
errors. Contact the Customer Support Center if
such an error occurs.
Prints various patterns on one page that help in the
assessment of print quality, including Grey,
Checkerboard, and text. Number of patterns depends
on the current form length.
This item appears only if the validator is installed.
Prints a report of the validation statistics since the
printer was turned on or since the last data reset.
Auto Calibrate
Tools > Print Tests > Test Count
Print continuously until the user stops the test by
printing the ENTER key.
Choose among 1 Page, 2 Pages, 5 Pages, or 10
Pages.
Continuous
Tools > Diagnostics > Print Error Log
Tools > Diagnostics > Clear Error Log