Printronix T8000 Administrator's Manual page 120

This parameter allows you to manipulate forms created with the CREATE
command to include variable form length parameters.
Add Nothing
Add ;0
Add ;X
Factory Default
Stands for Skip Command Prefix. This parameter determines if the printer
will print any data before a PGL command is received.
Disable
Enable
Factory Default
Determines if text in NORMAL mode will be printed or ignored.
Disable
Enable
Factory Default
120
Application > PGL Setup > Var Form Type
When selected, no action is taken.
When selected, the form length ends at the longest
printed element. (Same as ~CREATE;filename;0).
When selected, the form length is set to match the
value in Media > Image > Label Length.
Add Nothing
Application > PGL Setup > Skip Cmd Prefix
The printer will print all data before a PGL command.
The printer ignores all data before a PGL command.
Enable
Application > PGL Setup > Ignore Text
When disabled, text in normal mode will be printed.
Attributes to be printed depend on the PGL Normal
menu setting.
When enabled, any line of text (non-PGL commands)
in normal mode will be ignored.
Disable