Printronix T8000 Administrator's Manual page 131

Application > VGL Setup > Rot. Char Size
Determines how expanded characters will be sized when rotated.
Rotated (clockwise/counterclockwise), expanded
Adjusted characters have a different size than an unrotated
character with the same size parameters.
Rotated, expanded characters will be the same size as
Not Adjusted
unrotated characters with the same size parameters.
Factory Default Adjusted
Application > VGL Setup > Ignore Spaces
Controls how trailing spaces are treated within alphanumeric elements.
Trailing spaces are not deleted from alphanumeric
Disable
elements in a graphics pass.
Trailing spaces are deleted from alphanumeric
Enable
elements in a graphics pass.
Factory Default Disable
Application > VGL Setup > Ignore ^Lxx Cmd.
Controls how VGL handles form length commands.
The Form Length commands ^Lxx and ^Hxx will be
Disable
used from the VGL application.
The Form Length commands ^Lxx and ^Hxx will be
Enable ignored, and the form length will be determined by
Application > LP+ Setup > Form Length (xx).
Factory Default Disable
Application > VGL Setup > Midline PY
Controls whether the ^PY command will be allowed in the middle of a line.
The Graphics mode Enabled command, ^PY, must be
Disable
the first three characters of a line.
Enable The ^PY or ^PN can occur anywhere in a line.
Factory Default Disable
131