Printronix T8000 Administrator's Manual page 77

Solution #1 with Menu Settings:
•
Set Media > Auto Label Map > Auto Label Width to "2.0" (the width of two labels)
•
Set Media > Auto Label Map > Num Auto Labels to "2"
•
Set Media > Auto Label Map > Select to "Enable".
Printer Operation for Solution #1: The printer will print the first two labels at the same time. These first
two labels will be horizontally adjacent. Once these labels have been completed, the printer will print the
remaining 2.0" labels along with a blank 2.0" label. See figure below.
Solution #2 with Menu Settings:
•
Set Media > Auto Label Map > Auto Label Width to "2.0" (the width of two labels)
•
Set Media > Auto Label Map > Num Auto Labels to "3"
•
Set Media > Auto Label Map > Select to "Enable".
Printer Operation for Solution #2: The printer will print the first 2.0" label by itself, the second 2.0" label
by itself, and finally, the last 2.0" label by itself. See figure below.
77