Application > Proprinter Setup - Printronix T8000 Administrator's Manual

Application > Serial Matrix Setup > ESC d Command
This item is for backward compatibility.
Even dot plot
Double high
Factory Default
Application > Proprinter Setup
IMPORTANT
The Proprinter Setup submenu will only be present when the LP+ Emulation
menu is set to Proprinter XL. Otherwise, this menu will be replaced with the LP+
Emulation menu.
Application > Proprinter Setup > Character Group
This option selects the Character Set Group. Based on the group selected,
then the character set can be chosen with the menu following XXX Sets. The
group Standard Sets is shown below because it is unique to Proprinter. All
other groups are similar and described in LP+, PGL, VGL Character Sets
This option will show when menu Character Group is set to Standard Sets.
Code Page 437 *
Code Page 850
OCR-A
OCR-B
Multinational
CP 858 EURO
Factory Default
This option interprets the ESC d command as even dot
plot.
This option interprets the ESC d command as double
high. Select this option for backward compatibility.
Even dot plot.
Application > Proprinter Setup > Standard Sets
ASCII (USA) *
EBCDIC
Those above with asterisk *
159