Printronix T8000 Administrator's Manual page 63

Media > Image > Label Width
This option specifies the physical width of the image to be printed.
Minimum 0.1 inches
Maximum Maximum based on printer model/printhead.
T8x04: 4.1 inches
Factory Default T8x06: 6.6 inches
T8x08: 8.5 inches
Media > Image > Set Label Length
This feature selects whether the Sensed Distance value derived from an Auto
or Manual Calibrate will be used to set the Label Length menu. If no calibration
is performed, this menu has no effect.
The Sensed Distance will not override or change the
Manual
Label Length value.
The Sensed Distance value will override and change
the Label Length value. If Sensors Control > Gap/Mark
Automatic Sensor = Gap, Advanced Gap, or Advanced Notch, the
printer will subtract the Sensors > Calibrate > Gap
Length value.
Factory Default Automatic
For Automatic setting, the Sensors > Calibrate >
IMPORTANT
Use Label Length is ignored (treated as disabled).
63