Regular Maintenance - Eiki EK-700LUL Owner's Manual

LED indicator
The LED indicator shows status of projector protection function. Check POWER, STATUS and
LIGHT indicator for good maintenance operation.
Note:
!
Unplug the AC power cord in case of any abnormality as it may lead to fire or electric
shock.
The projector turns off and the POWER indicator fast blinking red.
Your projector is powers off automatically to
protect components within it when it detected
the internal temperture has overheated. The
POWER indicator blinking green while the
projector is cooling down. Press the STAND-
BY button to power your projector on again
when it is cooled down to normal operation
temperature.
Check the following:
– Is adequate clearance provided for your
projector's ventilation? Check the installa-
tion status and any air outlet block.
– Is your projector installed at location close
to outlet of air conditioning equipment?
Keep your projector away from air outlet of
air conditioning equipment.
– Is the filter in clean condition? Please
clean the filter regularly.
The projector powers off and the POWER indicator turns red, the STATUS indicator blinking red.
The POWER indicator turns red and the
STATUS indicator start blinking red, then
the projector powers off to protect its inter-
nal components whenever an abnormality
is detected. Unplug the AC power cord and
connect again. Restart your projector and run
checkup routine. If the problem persists, un-
plug the AC power cord and call your service
center for checkup and maintenance.

Regular maintenance

INPUT
ENTER
MENU
INPUT
MENU
The Power indicator
blinking red
EXIT
Note:
The POWER indicator stops Blinking when your
projector's internal temperature cooled down to
normal and it can powered on again.
The STATUS indicator
stays red
ENTER
EXIT
The POWER indicator
blinking red
67