Regular Maintenance; Led Indicator - Eiki EK-50LU Owner's Manual

Hide thumbs

Table Of Contents

Table of Contents

LED indicator

The LED indicator shows status of projector protection function. Check POWER, STATUS and

LIGHT indicator for good maintenance operation.

Note:

Unplug the AC power cord in case of any abnormality as it may lead to fire or electric

shock.

The projector turns off and the POWER indicator fast blinking red.

Your projector is powers off automatically to

protect components within it when it detected

the internal temperture has overheated. The

POWER indicator blinking green while the

projector is cooling down. Press the STAND-

BY button to power your projector on again

when it is cooled down to normal operation

temperature.

Check the following:

– Is adequate clearance provided for your

projector's ventilation? Check the installa-

tion status and any air outlet block.

– Is your projector installed at location close

to outlet of air conditioning equipment?

Keep your projector away from air outlet of

air conditioning equipment.

– Is the filter in clean condition? Please

clean the filter regularly.

The projector powers off and the POWER indicator turns red, the STATUS indicator blinking red.

The POWER indicator turns red and the

STATUS indicator start blinking red, then

the projector powers off to protect its inter-

nal components whenever an abnormality

is detected. Unplug the AC power cord and

connect again. Restart your projector and run

checkup routine. If the problem persists, un-

plug the AC power cord and call your service

center for checkup and maintenance.