Install Battery Of Remote Controller - Eiki EK-850LU Owner's Manual

Name and function of your projector

Install battery of remote controller

Open the battery cover.
Insert a new battery in it.
Two AA (LR6) batteries
Place your batteries with its
anode and cathode (+ and -)
in correct direction. Keep both
poles in good connection to the
contacts within the compartment.
Put the cover back.
Please follow the following rules for safety operation:
28
● Use two of AA or LR6 alkaline batteries.
● Replace both batteries at the same time.
● Do not mix new and old batteries as one pair.
● Keep your remote controller away from water or other liquids.
● Do not expose your remote controller to environments with high
humidity or temperature.
● Do not drop your remote controller.
● In case of any battery solution leaking in the compartment, clear it
thoroughly before placing new batteries in it.
● Using battery of other types than what specified on this manual may
lead to risks of explosion.
● Please dispose your old battery by following instructions given in tag
of the battery or local regulations.