Install Battery Of Remote Controller - Eiki EK-350U Owner's Manual

Name and function of the projector
IMAGE
Select image mode.
D.ZOOM+
Zoom in projected image.
FREEZE
Freeze projected images.
D.ZOOM-
Zoom out projected image.
SCREEN
Select screen size.
KEYSTONE
Keystone calibration.
PATTERN
Select built-in test pattern of the projector.
INFO.
Display current status information of the
projector.
Operation range of remote controller
Point the remote controller to the IR receiver of
the projector
Maximum operation range of the remote con-
troller is an area of radius 5 meters / arc 60° in
front of and behind the projector
18
*
30°
30°
30°
30°
Name and function of the projector

Install battery of remote controller

Open the battery cover.
Insert a new battery in it.
Two AA (LR6) batteries
Place the batteries with its anode
and cathode (+ and -) in correct
direction. Keep both poles in
good connection to the contacts
within the compartment.
Put the cover back.
Please follow the following rules for safety operation:
● Use two of AA or LR6 alkaline batteries.
● Replace both batteries at the same time.
● Do not mix new and old batteries as one pair.
● Keep the remote controller away from water or other liquids.
● Do not expose the remote controller to environments with high hu-
midity or temperature.
● Do not drop the remote controller.
● In case of any battery solution leaking in the compartment, clear it
thoroughly before placing new batteries in it.
● Using battery of other types than what specified on this manual may
lead to risks of explosion.
● Please dispose the old battery by following instructions given in tag
of the battery or local regulations.
19