Table of Contents
Advertisement
PREFACE
PREFACE
CH 3. CRAFT ROBO CONTROLLER
CH 3. CRAFT ROBO CONTROLLER
CHAPTER 2. CONNECTION AND PREPARATION
2.1 Connecting and Turning on the Power
Use the AC adapter and the power cable provided with the Craft ROBO to connect the AC adapter jack on
the Craft ROBO to an AC outlet of the rated voltage, and then turn on the power.
Always connect the AC adapter to the AC adapter jack before connecting the power cable to the AC
CHECKPOINT
outlet.
(1) Connect the power cable (included with the AC adapter) to the AC adapter.
(2) Plug the AC adapter cable into the AC adapter jack of the Craft ROBO.
(3) Plug the other end of the power cable into the AC outlet.
(4) Press the standby switch.
When the Craft ROBO is in standby status, the LED lamp is lit green.
When the Craft ROBO is not in standby status, the LED lamp is extinguished.
CHAPTER 2. CONNECTION AND PREPARATION
CONTENTS
CONTENTS
CH 4. CUTTING DATA SAVED ON SD CARD
CH 4. CUTTING DATA SAVED ON SD CARD
(2)
CH 1. PRIOR TO USE
CH 1. PRIOR TO USE
APPENDIX A
APPENDIX A
(1)
CH 2. CONNECTION AND PREPARATION
CH 2. CONNECTION AND PREPARATION
INDEX
INDEX
(3)
2-1
- Quick Links:
- Table of Contents
- Connecting.to.a.computer
- Loading.media.using.the.carrier.sheet
- Allowable.cutting.area
- Adjusting.and.mounting.the.blade.plunger
- Craft.robo.controller.operations
- Cutting.your.design
- Printing.your.design.on.a.printer,.And.then.using.the.craft.robo.to.cut.it.(Cc330-20.Only)
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the CC300-20 Craft ROBO and is the answer not in the manual?
Questions and answers
i need a driver for this model cc300-20 **** running windows 7
You can download the latest version of the Craft ROBO Controller from the Craft ROBO website and install it. If you encounter issues, uninstall the currently installed version before reinstalling.
This answer is automatically generated