3.12.2 UPPER COVER
1. Detach the finisher from the printer if it is installed.
2. Open the duplex inverter unit if it is installed.
3. Fusing unit (
3.12.1)
4. Knob [A] ( x 1)
5. Upper cover [B] ( x 4)
NOTE: One of the screws [C] is longer than the other screws. Make sure that
the screw [C] is positioned as shown above when you reassemble this
unit.
SM
[C]
B178R001.WMF
3-63
FUSING
[B]
[A]
B202/B178/B180