Detailed Descriptions; General Layout - Ricoh B202 Service Manual

Hide thumbs Also See for B202:

Table of Contents

4. DETAILED DESCRIPTIONS

4.1 GENERAL LAYOUT

1. Upper junction gate

2. Punch unit (option)

3. Stapler junction gate

4. Pre-stack tray

Tray junction gate: Directs paper either to the upper or lower exit. In staple mode,

the stack always goes out to the lower exit.

Stapler junction gate: Directs paper either to the lower exit or to the stapler tray.

Pre-stack tray: When stapling multiple prints (A4 LEF, LT LEF, B5 LEF only) in the

staple mode, the first sheet of the second print waits here for the next sheet to feed

while the previous stack is stapled. After the second print is fed, the first and

second sheets are fed together to the pre-stack tray. This delay allows enough time

for the previous stack to be stapled without interrupting paper feed.

Shift trays: Tray 1 (upper) and tray 2 (lower) shift side to side in the sort mode,

and raise and lower to receive ejected prints.

Stapler tray jogger: Employs positioning rollers and jogger fences to align stacks

for stapling.

Punch unit: Punches holes in stacked prints.

B599D118.WMF

6. Stapler tray

Table of Contents